TIME-10 - Stopwatch Amprobe - Free user manual and instructions
Find the device manual for free TIME-10 Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Stopwatch |
| Brand | Amprobe |
| Model | TIME-10 |
| Display | LCD, 1 line, 8 digits |
| Dimensions | 2.5 x 0.8 x 0.5 inches (63.5 x 20.3 x 12.7 mm) |
| Weight | 1 ounce (28 grams) |
| Power Source | CR2032 lithium coin cell battery |
| Battery Life | Approximately 2 years with normal use |
| Main Functions | Start/Stop, Lap/Split, Countdown Timer, Time of Day |
| Accuracy | ±0.001% (quartz crystal timebase) |
| Max Time Range | 23 hours, 59 minutes, 59.99 seconds |
| Resolution | 0.01 second for timing, 1 second for clock |
| Memory | Stores last 100 lap/split times |
| Water Resistance | Splash resistant (IPX4 rating) |
| Material | Plastic case with rubber buttons |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Maintenance | Clean with a soft, dry cloth. Avoid solvents. |
| Battery Replacement | Replace with CR2032, observe polarity |
| Safety | Do not immerse in water. Keep away from magnets. |
| Spare Parts | Replacement battery, wrist strap |
| Repairability | Battery user-replaceable; other repairs by qualified technician |
| General Information | CE and RoHS compliant |
Frequently Asked Questions - TIME-10 Amprobe
How do I start and stop the stopwatch?
Press the Start/Stop button to begin timing. Press it again to stop. Press Reset to clear the time.
How do I use the lap function?
While timing, press the Lap button to record a lap time. The display freezes momentarily, then continues timing. Up to 100 laps can be stored.
How do I replace the battery?
Remove the battery compartment cover with a small screwdriver. Replace the old CR2032 with a new one, observing the + polarity.
What is the accuracy of the stopwatch?
The stopwatch uses a quartz crystal oscillator with an accuracy of ±0.001%, or about 0.86 seconds per day.
Can I use the stopwatch while it is charging?
The device uses a replaceable battery and does not have a rechargeable battery. It operates on the CR2032 battery only.
How do I set the time of day?
Press and hold the Mode button until the hour digits flash. Use Start/Stop to adjust, then press Mode to move to minutes. Press Reset to confirm.
What does the countdown timer do?
Press Mode to access the countdown mode. Set the desired time using the buttons, then press Start/Stop to begin. The timer counts down to zero and beeps.
Is the stopwatch water resistant?
It is splash resistant with an IPX4 rating. Do not submerge in water or use in heavy rain.
How do I clear all stored lap times?
While in lap review mode, press and hold the Reset button for 3 seconds to delete all stored lap/split data.
What should I do if the display goes blank?
Check the battery. If it is depleted, replace it with a new CR2032. Ensure the battery contacts are clean and the battery is inserted correctly.
User questions about TIME-10 Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stopwatch in PDF format for free! Find your manual TIME-10 - Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TIME-10 by Amprobe.
USER MANUAL TIME-10 Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Amprobe
Model : TIME-10
Category : Stopwatch