DM-II-PLUS - Multimeter Amprobe - Free user manual and instructions
Find the device manual for free DM-II-PLUS Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Amprobe |
| Model | DM-II-PLUS |
| DC Voltage Range | 200 mV to 600 V |
| AC Voltage Range | 200 mV to 600 V |
| DC Current Range | 200 µA to 10 A |
| AC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 20 MΩ |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Display | LCD, 3½ digit, 2000 counts |
| Dimensions (HxWxD) | 140 x 70 x 30 mm |
| Weight | 200 g (with battery) |
| Power Supply | 9V battery (NEDA 1604 or 6F22) |
| Overrange Indication | "OL" displayed |
| Auto Power Off | Yes, after 30 minutes |
| Safety Rating | CAT II 600V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Accessories Included | Test leads, battery, manual |
| Maintenance & Cleaning | Wipe with dry cloth; no solvents |
| Reparability | Replaceable battery and fuse; no user-serviceable parts inside |
Frequently Asked Questions - DM-II-PLUS Amprobe
How do I measure DC voltage with the Amprobe DM-II-PLUS?
Turn the rotary switch to the DCV position. Connect the black lead to the COM jack and the red lead to the VΩ jack. Probe the circuit and read the display.
What is the maximum voltage the DM-II-PLUS can measure?
The maximum DC voltage is 600V. For AC voltage, it's also 600V RMS. Exceeding these limits may damage the meter.
How do I replace the battery in the DM-II-PLUS?
Remove the screw on the back cover, lift the battery compartment, and replace the 9V battery with a new one. Ensure correct polarity.
Does the DM-II-PLUS have an auto power-off feature?
Yes, the meter automatically turns off after 30 minutes of inactivity to save battery life. Press any button or rotate the dial to wake it.
How do I test continuity with the DM-II-PLUS?
Turn the dial to the continuity setting (often a diode/sound icon). Connect the probes across the component. A beep indicates continuity (<10Ω).
What does 'OL' on the display mean?
'OL' stands for Over Load. It indicates the measurement exceeds the selected range. Switch to a higher range if possible.
Can I measure AC current with the DM-II-PLUS?
Yes, turn the dial to the ACA range (e.g., 200mA or 10A). Connect the leads in series with the circuit. Do not exceed 10A for more than 10 seconds.
What is the safety rating of the DM-II-PLUS?
The meter is rated CAT II 600V, suitable for measurements on single-phase household outlets and appliances.
How do I clean the DM-II-PLUS?
Wipe the case with a damp cloth and mild detergent. Do not use solvents or abrasives. Never immerse the meter in water.
Are replacement test leads available for the DM-II-PLUS?
Yes, standard silicone test leads with shrouded banana plugs are compatible. Use only leads rated for CAT II 600V or higher.
User questions about DM-II-PLUS Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual DM-II-PLUS - Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DM-II-PLUS by Amprobe.
USER MANUAL DM-II-PLUS Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Amprobe
Model : DM-II-PLUS
Category : Multimeter