Redbox RB-DSS10 - Uncategorized Sonifex - Free user manual and instructions
Find the device manual for free Redbox RB-DSS10 Sonifex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Sonifex |
| Model | Redbox RB-DSS10 |
| Product Type | Digital Audio Distribution System |
| Dimensions (WxDxH) | 483 x 265 x 44 mm (19" rack mount, 1U) |
| Weight | 3.2 kg |
| Power Supply | 100-240 V AC, 50/60 Hz, internal PSU |
| Power Consumption | 25 W max |
| Audio Inputs | 1x AES/EBU (XLR), 1x S/PDIF (RCA) |
| Audio Outputs | 10x AES/EBU (XLR) individually configurable |
| Sample Rates | 32, 44.1, 48, 96 kHz |
| Bit Depth | 16, 24 bit |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| THD+N | < 0.005% at 1 kHz, 0 dBFS |
| Dynamic Range | > 120 dB (A-weighted) |
| Control Interface | Ethernet, RS-232, front panel buttons |
| Features | Reclocking, sample rate conversion, signal monitoring |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Keep clean with dry cloth; avoid liquids |
| Safety | Complies with CE, FCC; do not open cover |
| Spare Parts | Contact Sonifex support for replacement PSU, connectors |
Frequently Asked Questions - Redbox RB-DSS10 Sonifex
What is the Sonifex Redbox RB-DSS10 used for?
The Sonifex Redbox RB-DSS10 is a digital audio distribution amplifier that splits a single AES/EBU or S/PDIF input into 10 individually buffered outputs.
How do I connect the RB-DSS10 to my system?
Connect your digital audio source to either the XLR (AES/EBU) or RCA (S/PDIF) input. Then connect up to 10 outputs to your destination devices using XLR cables.
What sample rates does the RB-DSS10 support?
The RB-DSS10 supports sample rates of 32, 44.1, 48, and 96 kHz.
Can I use the RB-DSS10 for analog audio?
No, the RB-DSS10 is designed for digital audio signals only. For analog, consider Sonifex Redbox series analog distribution amplifiers.
How do I perform a factory reset?
Press and hold the 'Reset' button on the front panel for 5 seconds until all LEDs flash. The unit will revert to default settings.
What is the power consumption of the RB-DSS10?
The typical power consumption is 25 W, with an internal auto-ranging power supply (100-240 V AC).
Does the RB-DSS10 have remote control capabilities?
Yes, it features Ethernet and RS-232 control interfaces for integration with automation systems.
How do I clean the RB-DSS10?
Use a soft, dry cloth to wipe the exterior. Do not use solvents or liquids. Ensure the unit is unplugged before cleaning.
What does the 'Lock' LED indicate?
The 'Lock' LED illuminates when the unit locks onto a valid digital audio input signal. If it flashes, check your input source.
Where can I find spare parts or service?
Contact Sonifex support or an authorized distributor. Parts include replacement PSU modules and connector boards.
User questions about Redbox RB-DSS10 Sonifex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Redbox RB-DSS10 - Sonifex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Redbox RB-DSS10 by Sonifex.
USER MANUAL Redbox RB-DSS10 Sonifex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sonifex
Model : Redbox RB-DSS10
Category : Uncategorized