Sonifex

Redbox RB-MSP6 - Uncategorized Sonifex - Free user manual and instructions

Find the device manual for free Redbox RB-MSP6 Sonifex in PDF.

📄 76 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Sonifex Redbox RB-MSP6 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type 6-Channel Audio Mixer with Monitor Panel
Dimensions (W x D x H) 482 x 200 x 44 mm (19" rack, 1U)
Weight 2.5 kg
Power Supply 100-240 VAC, 50/60 Hz, internal PSU
Input Channels 6 balanced XLR/TRS combo jacks
Outputs 2 balanced XLR main outputs, 1 TRS headphones
Frequency Response 20 Hz - 20 kHz (±0.5 dB)
Signal-to-Noise Ratio >100 dB (A-weighted)
Total Harmonic Distortion <0.01% @ 1 kHz, +4 dBu
Controls Level faders per channel, master volume, EQ (if applicable)
Indicators LED VU meter per channel, power LED
Operating Temperature 0°C to 40°C
Mounting 19" rack mountable, 1U height
Connector Types XLR, TRS, RCA (if applicable)
Phantom Power +48V switchable per channel
Headphone Output 1/4" TRS, 32-600 ohms
Compliance CE, RoHS
Included Accessories Power cable, rack ears
Maintenance Clean with dry cloth; avoid liquids
Safety Class I equipment; use grounded outlet

Frequently Asked Questions - Redbox RB-MSP6 Sonifex

How do I connect microphones to the Sonifex Redbox RB-MSP6?
Use balanced XLR cables to connect microphones to the combo input jacks. Ensure phantom power (+48V) is enabled if required by the microphone.
Can I use the RB-MSP6 as a standalone mixer without a computer?
Yes, it is a standalone analog mixer with integrated monitor panel. No computer needed.
What is the maximum output level?
The main outputs can deliver up to +24 dBu into 600 ohms.
How do I adjust the monitor volume?
Use the dedicated monitor level knob on the front panel. It controls the headphone and monitor output independently.
Does the RB-MSP6 have equalization controls?
Yes, each input channel features a 3-band EQ (Low, Mid, High) with shelving filters.
Can I mount the device in a rack?
Yes, it is designed for 19-inch rack mounting in 1U space. Rack ears are included.
What type of power supply does it use?
It has an internal power supply accepting 100-240 VAC, 50/60 Hz. An IEC power cable is provided.
How do I clean the device?
Use a soft dry cloth. Do not use any liquids or cleaning agents. Ensure power is disconnected.
What should I do if there is no sound output?
Check that the master volume is up, input channels are unmuted, cables are properly connected, and phantom power is on if needed. Also verify the source is active.
Is the RB-MSP6 compatible with balanced or unbalanced signals?
It accepts both balanced and unbalanced signals via combo jacks. For balanced use, use TRS or XLR; for unbalanced, use TS connectors.

User questions about Redbox RB-MSP6 Sonifex

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Redbox RB-MSP6 - Sonifex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Redbox RB-MSP6 by Sonifex.

USER MANUAL Redbox RB-MSP6 Sonifex

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Sonifex

Model : Redbox RB-MSP6

Category : Uncategorized