HY-03DTD - Uncategorized Sonifex - Free user manual and instructions
Find the device manual for free HY-03DTD Sonifex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Broadcast Audio Interface / Digital Processor |
| Brand | Sonifex |
| Model | HY-03DTD |
| Dimensions (W x H x D) | 19 x 1.75 x 8 inches (483 x 44 x 203 mm) |
| Weight | Approximately 2.5 kg (5.5 lbs) |
| Power Supply | Internal universal AC input 100-240V, 50/60Hz |
| Power Consumption | 15W typical |
| Audio Inputs | 2 x XLR balanced analog inputs, 1 x AES/EBU digital input (XLR) |
| Audio Outputs | 2 x XLR balanced analog outputs, 1 x AES/EBU digital output (XLR) |
| Digital Audio Format | AES3, S/PDIF (via adapter) |
| Sample Rates | 32, 44.1, 48, 96 kHz |
| Bit Depth | 24-bit |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | > 110 dB (A-weighted) |
| Total Harmonic Distortion | < 0.001% @ 1 kHz |
| Control Interface | Front panel buttons, LCD display |
| Mounting | 19-inch rack mount, 1U |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Relative Humidity | Up to 90% non-condensing |
| Accessories Included | Power cord, rack ears, user manual |
| Cleaning Instructions | Use a soft, dry cloth. Do not use solvents or abrasive cleaners. |
| Safety Certifications | CE, FCC, RoHS |
| Repairability | Consult authorized service center for repairs. Spare parts available from Sonifex. |
Frequently Asked Questions - HY-03DTD Sonifex
What is the Sonifex HY-03DTD used for?
The HY-03DTD is a broadcast-grade audio interface and digital processor designed for converting, routing, and processing analog and digital audio signals in studio or live environments.
How do I connect the device to my audio system?
Connect analog sources to the XLR inputs and outputs. For digital signals, use the AES/EBU input and output. Ensure proper impedance matching and use balanced cables for optimal performance.
What sample rates are supported?
The HY-03DTD supports sample rates of 32, 44.1, 48, and 96 kHz with 24-bit resolution. It can automatically detect the incoming sample rate or be set manually via the front panel.
Can I use the device as a standalone unit without a computer?
Yes, the HY-03DTD operates standalone with front panel controls. No computer is required for basic operation, though firmware updates may require a USB connection.
Does the device include a power supply?
Yes, a universal AC power supply (100-240V) and appropriate power cord are included. The unit has an internal power module, so no external brick is needed.
How do I clean the unit?
Disconnect power and use a soft, lint-free cloth slightly dampened with water to wipe the exterior. Do not use alcohol, solvents, or abrasive cleaners. Ensure no liquid enters vents.
What LED indicators mean?
The front panel has power, signal presence, clipping, and lock LEDs. Green for power/signal, red for clipping/lock loss. Refer to manual pages 12-13 for full explanation.
Is the device rack-mountable?
Yes, it is 1U high and fits a standard 19-inch rack. Rack ears are included. Use all four screws to secure properly.
How to troubleshoot no audio output?
Check power LED, ensure input source is active, verify connections, and check that the correct input is selected. If using digital, confirm lock LED is lit. Reset by power cycling.
Where can I find the full manual?
The user manual is available for free download on notice-facile.com. It contains detailed specifications, configuration steps, and troubleshooting guidance.
User questions about HY-03DTD Sonifex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HY-03DTD - Sonifex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HY-03DTD by Sonifex.