LSR636O62G - Washing machine AEG - Free user manual and instructions
Find the device manual for free LSR636O62G AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | AEG |
| Model | LSR636O62G |
| Capacity | 8 kg |
| Maximum Spin Speed | 1600 rpm |
| Dimensions (Height x Width x Depth) | 85 cm x 60 cm x 60 cm |
| Weight | 75 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A+++ |
| Key Features | ProSense, ProSteam, OKoPower, Fuzzy Logic, Delay Timer |
| Noise Level (Wash/Spin) | 52 dB / 76 dB |
| Safety Features | Child Lock, Anti-Flood, Overflow Protection |
| Maintenance Programs | Drum Cleaning, Descaling |
| Spare Parts Availability | 10 years after purchase |
| Manual Languages | DA, EN, FI, IS, NO, SV |
Frequently Asked Questions - LSR636O62G AEG
How to install the AEG LSR636O62G washing machine?
Remove all packaging and transport bolts. Place the machine on a level, solid floor. Connect the inlet hose to a cold water tap and the drain hose to a drain pipe or sink. Plug into a grounded outlet. Level the machine by adjusting the feet and tighten the lock nuts.
How to use the child lock feature?
Press and hold the Child Lock button (usually marked with a padlock icon) for 3 seconds to activate. A symbol will appear on the display. Repeat to deactivate. This prevents accidental changes during a cycle.
What does error code E10 mean?
Error code E10 indicates a water fill problem. Check that the water tap is fully open, the inlet hose is not kinked, and the water pressure is adequate. Also clean the inlet filter.
How to clean the detergent drawer?
Press the release catch inside the drawer and pull it out. Rinse under warm water to remove detergent residue. Use a brush to clean the compartment. Dry and reinsert.
How to run a drum cleaning cycle?
Select the Drum Cleaning program from the dial. Add a descaling agent or special cleaner to the main wash compartment. Press start. The machine will heat the water to 90°C to remove limescale and bacteria.
Why is the machine not draining?
Check for a blocked drain hose or pump filter. The pump filter is located at the bottom front. Clean it by unscrewing and removing debris. Ensure the drain hose is not kinked or blocked.
How to remove the transport bolts?
Unscrew the four transport bolts on the back of the machine using a 10 mm wrench. Pull out the plastic spacers and keep the bolts for future moves. Plug the holes with the supplied caps.
What is the maximum spin speed and can I adjust it?
The maximum spin speed is 1600 rpm. You can adjust it using the spin speed button before starting a cycle. Lower speeds are suitable for delicate fabrics.
How to reset the washing machine?
Turn the program dial to Off and unplug the machine for 1 minute. Plug back in and select a new program. If issues persist, refer to the manual or contact service.
How to adjust the feet for leveling?
Loosen the lock nuts on the feet with a wrench. Rotate the feet to raise or lower the corners. Use a spirit level to ensure the machine is level. Tighten the lock nuts when done.
User questions about LSR636O62G AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual LSR636O62G - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LSR636O62G by AEG.
USER MANUAL LSR636O62G AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : LSR636O62G
Category : Washing machine