GV200REMB - Water heater HAIER - Free user manual and instructions
Find the device manual for free GV200REMB HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Heater |
| Brand | Haier |
| Model | GV200REMB |
| Capacity | 200 L |
| Dimensions (H x W x D) | 1500 x 500 x 500 mm |
| Weight (empty) | 60 kg |
| Power Consumption | 3 kW |
| Energy Efficiency Class | A |
| Tank Material | Enameled steel |
| Insulation | Polyurethane foam |
| Maximum Temperature | 75 °C |
| Thermostat | Adjustable with safety cut-off |
| Pressure Relief Valve | Included |
| Anode Rod | Magnesium (replaceable) |
| Installation Type | Floor-standing |
| Control Type | Mechanical knob |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Warranty | 2 years |
| Maintenance | Annual anode check and descaling recommended |
| Safety Features | Overheat protection, pressure relief, thermal fuse |
| Certification | CE, RoHS |
Frequently Asked Questions - GV200REMB HAIER
How do I set the temperature on my Haier GV200REMB water heater?
Use the mechanical thermostat knob on the front panel to adjust the temperature. The recommended setting is between 55 °C and 60 °C for optimal energy efficiency and to prevent scalding.
What should I do if the water heater is leaking?
First, turn off the power supply and close the cold water inlet valve. Check if the relief valve is leaking (normal during heating) or if there is a tank leak. For tank leaks, contact a professional technician.
How often should I replace the anode rod?
The magnesium anode rod should be inspected annually and replaced every 2-3 years, depending on water hardness. This prevents tank corrosion.
Why is my water heater making strange noises?
Noises like popping or rumbling are often due to scale buildup inside the tank. Flush the tank annually to remove sediment and reduce noise.
Can I install the water heater myself?
Installation requires plumbing and electrical expertise. It is recommended to hire a qualified professional to ensure compliance with local codes and safety.
How can I save energy with my water heater?
Set the thermostat to 55 °C, insulate the hot water pipes, and use low-flow fixtures. Also, take shorter showers to reduce heat loss.
What does the pressure relief valve do?
It automatically releases excess pressure if the tank overheats or pressure builds up, preventing explosion. Ensure it is not blocked.
How do I drain the water heater?
Turn off power, close the cold water valve, connect a hose to the drain valve, open a hot water tap, and open the drain valve. Drain completely to remove sediment.
What is the lifespan of the Haier GV200REMB?
With proper maintenance, including anode replacement and periodic descaling, the water heater can last 10-15 years.
Is the water heater suitable for hard water areas?
Yes, but hard water accelerates scale buildup. Install a water softener or increase descaling frequency to maintain performance.
User questions about GV200REMB HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual GV200REMB - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV200REMB by HAIER.
USER MANUAL GV200REMB HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : GV200REMB
Category : Water heater