FCD-JTLD245 - Water heater HAIER - Free user manual and instructions
Find the device manual for free FCD-JTLD245 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | Haier |
| Model | FCD-JTLD245 |
| Tank Capacity | 50 L |
| Dimensions (H x W x D) | 850 x 400 x 400 mm |
| Weight (Empty) | 20 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Heating Power | 2000 W |
| Maximum Temperature | 75°C |
| Maximum Pressure | 0.8 MPa |
| Material | Enameled steel tank |
| Insulation | Polyurethane foam |
| Heating Element | Copper-encased stainless steel |
| Temperature Adjustment | Thermostat with dial (30-75°C) |
| Safety Features | Overheat protection, pressure relief valve, leakage protection |
| Anti-Corrosion | Magnesium anode rod |
| Installation | Wall-mounted, horizontal or vertical |
| Energy Efficiency Class | B (estimated) |
| Maintenance | Drain valve, replace anode every 2 years |
| Spare Parts Available | Heating element, thermostat, anode rod, gaskets |
| Warranty | 2 years (standard) |
Frequently Asked Questions - FCD-JTLD245 HAIER
How do I install the Haier FCD-JTLD245 water heater?
Installation must be performed by a qualified professional. The heater should be mounted on a solid wall using the supplied brackets. Ensure proper grounding and connect to cold water supply with a pressure relief valve.
What is the recommended temperature setting for energy savings?
Set the thermostat to 60°C (140°F) for optimal balance of energy efficiency and hygiene. Lower temperatures reduce energy consumption but may allow bacterial growth.
How often should I replace the anode rod?
The magnesium anode rod should be inspected annually and replaced every 2-3 years to prevent tank corrosion. Hard water may require more frequent replacement.
Why is my water heater leaking from the pressure relief valve?
This may indicate excessive pressure or a faulty valve. Check if the water temperature is too high (max 75°C). If the valve drips constantly, it may need replacement.
How do I drain the tank for maintenance?
Turn off power and cold water supply. Attach a hose to the drain valve at the bottom. Open the valve and a hot water tap to allow air in. Drain completely before servicing.
What should I do if the water is not heating?
First check the circuit breaker and ensure power is on. If the thermostat is set correctly, the heating element may be faulty and require replacement. Contact a technician.
Can I install the water heater outdoors?
This model is designed for indoor use only. Exposure to moisture and temperature extremes can damage electrical components and void the warranty.
Is the Haier FCD-JTLD245 compatible with solar pre-heating?
Yes, it can be connected to a solar system as a backup. Install a mixing valve to prevent scalding if the solar pre-heat exceeds 75°C.
How long does it take to heat a full tank?
With a 2000W element and 50L capacity, heating from 20°C to 60°C takes approximately 70 minutes. Recovery time depends on inlet water temperature.
What is the noise level during operation?
The water heater operates silently. You may hear a slight hissing during heating due to water expansion or dripping from the pressure relief valve, which is normal.
User questions about FCD-JTLD245 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual FCD-JTLD245 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FCD-JTLD245 by HAIER.
USER MANUAL FCD-JTLD245 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : FCD-JTLD245
Category : Water heater