ES10VS1 - Water heater HAIER - Free user manual and instructions
Find the device manual for free ES10VS1 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | ES10VS1 |
| Brand | Haier |
| Capacity | 10 US Gallons (38 Liters) |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Power Rating | 1500 W |
| Max Water Temperature | 140°F (60°C) |
| Energy Factor | 0.92 |
| Weight (Empty) | 50 lbs (22.7 kg) |
| Dimensions (H x W x D) | 32 x 19.5 x 19.5 inches (81.3 x 49.5 x 49.5 cm) |
| Tank Material | Glass-lined Steel |
| Insulation | 2-inch Polyurethane Foam |
| Installation Type | Wall-Mounted |
| Safety Features | T&P Relief Valve, Automatic Shut-off |
| Water Connection Size | NPT 3/4 inch |
| Control Type | Top Thermostat Dial |
| Included Components | Water Heater, T&P Valve, Installation Manual |
| Maintenance | Annual tank flushing, check anode rod |
| Warranty | 6 Years on Tank, 2 Years on Parts |
Frequently Asked Questions - ES10VS1 HAIER
How do I set the water temperature on my Haier ES10VS1?
Locate the thermostat dial on the front of the tank. Turn it to your desired temperature setting, typically between 120°F and 140°F. Wait for the heater to reach that temperature before use.
Why is my water heater making a popping noise?
A popping sound usually indicates sediment buildup inside the tank. Flush the tank annually by attaching a hose to the drain valve and opening it until water runs clear. This helps remove mineral deposits that cause noise.
How often should I replace the anode rod?
Check the anode rod every 1-2 years. Replace it if more than 6 inches of core wire is exposed or if it's heavily corroded. Regular replacement extends the life of the tank, typically every 3-5 years depending on water quality.
What is the recommended temperature setting for energy saving?
For most households, setting the thermostat to 120°F (49°C) balances energy savings and safety. Higher settings up to 140°F can increase risk of scalding and energy use.
How do I drain and flush my Haier water heater?
Turn off power to the heater. Attach a garden hose to the drain valve at the bottom. Open a hot water faucet nearby to allow air in. Open the drain valve and let water flow until clear. Close the valve, remove hose, and refill before restoring power.
What does the T&P relief valve do?
The Temperature and Pressure (T&P) relief valve automatically opens if water temperature exceeds 210°F or pressure exceeds 150 psi, preventing explosive failures. Test it monthly by lifting the lever briefly.
Can I install the ES10VS1 myself?
Installation requires knowledge of local plumbing and electrical codes. It's recommended to hire a licensed professional. The heater must be securely wall-mounted and connected to cold and hot water lines with proper shut-off valves.
How long does the Haier ES10VS1 last?
With proper maintenance (annual flushing, anode rod replacement), a glass-lined water heater typically lasts 10-15 years. Hard water can shorten lifespan.
Why is there no hot water?
First check if the heater is receiving power (reset the circuit breaker). Ensure the thermostat is not set too low. If the heating element fails, it may need replacement. Consult the manual for troubleshooting.
How do I clean the exterior of the water heater?
Use a damp cloth with mild detergent to wipe down the outer surface. Avoid abrasive cleaners or water spray near electrical connections. Keep the area around the heater clean and free of dust.
User questions about ES10VS1 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual ES10VS1 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES10VS1 by HAIER.
USER MANUAL ES10VS1 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : ES10VS1
Category : Water heater