BRUTUS BRL2000.1 - Receiver Hifonics - Free user manual and instructions
Find the device manual for free BRUTUS BRL2000.1 Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Amplifier |
| Model | BRUTUS BRL2000.1 |
| Brand | Hifonics |
| Amplifier Class | Class D |
| Number of Channels | 1 (Mono) |
| RMS Power Output | 2000W x 1 @ 1 ohm |
| Frequency Response | 20 Hz – 200 Hz |
| Input Voltage | 12V DC (10V – 15V) |
| Dimensions (W x L x H) | 12.2 x 7.5 x 2.3 inches |
| Weight | 7.5 lbs |
| Remote Bass Control | Included |
| Low Pass Filter | Variable 50 Hz – 200 Hz |
| Subsonic Filter | Variable 15 Hz – 50 Hz |
| Bass Boost | 0 – 18 dB @ 45 Hz |
| Phase Shift | 0° / 180° |
| Input Sensitivity | 200 mV – 6V |
| Speaker Impedance | 1 – 4 ohms |
| Fuse Rating | 150A (AGU or ANL) |
| Cooling | Fan assisted |
| Safety Protections | Thermal, over-voltage, short circuit |
| Mounting Type | Fixed mounting brackets |
| Warranty | 1 year limited |
| Manual Languages | English |
Frequently Asked Questions - BRUTUS BRL2000.1 Hifonics
What is the RMS power output of the Hifonics BRUTUS BRL2000.1?
The Hifonics BRUTUS BRL2000.1 delivers 2000W RMS at 1 ohm, making it suitable for powerful subwoofers.
What impedance can this amplifier handle?
It is stable down to 1 ohm and can also run at 2 or 4 ohms for flexibility.
Does the BRL2000.1 include a remote bass control?
Yes, it comes with a wired remote bass control for easy adjustment from the driver's seat.
What type of fuse does it require?
The amplifier requires a 150A AGU or ANL fuse (not included). Always use the recommended rating.
How do I wire the amplifier for maximum power?
For 2000W RMS, use a 1 ohm load by paralleling dual voice coil subs. Ensure 4 AWG power wire and proper ground.
What are the dimensions of the amplifier?
Approximately 12.2 x 7.5 x 2.3 inches (W x L x H). Check vehicle space before mounting.
Can I bridge this amplifier with another?
The BRL2000.1 is a mono block amplifier. It cannot be bridged, but you can use two together for more power.
Does it have a subsonic filter?
Yes, a variable subsonic filter (15-50 Hz) to protect the sub from low frequencies below port tuning.
What voltage range does the amplifier accept?
It operates on a 10V – 15V DC electrical system. Use a reliable 12V battery and alternator.
How to clean and maintain the amplifier?
Keep it dry and dust-free. Use a soft brush for the fan and heatsink. Avoid liquids. Check connections periodically.
User questions about BRUTUS BRL2000.1 Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual BRUTUS BRL2000.1 - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRUTUS BRL2000.1 by Hifonics.
USER MANUAL BRUTUS BRL2000.1 Hifonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hifonics
Model : BRUTUS BRL2000.1
Category : Receiver