FFB41610ZM - Washing machine AEG - Free user manual and instructions
Find the device manual for free FFB41610ZM AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Load Capacity | 8 kg |
| Maximum Spin Speed | 1400 rpm |
| Dimensions (H x W x D) | 85 cm x 60 cm x 50 cm |
| Weight | Approx. 70 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | D |
| Annual Energy Consumption | 152 kWh (based on 220 cycles) |
| Water Consumption per Cycle | 47 L (Eco 40-60 program) |
| Noise Level (Spin) | 76 dB(A) |
| Programs | 15+ programs including Cotton, Synthetics, Delicates, Eco, Quick, Rinse & Spin |
| Display | LED display with time remaining and program selection |
| Special Features | ProSteam, ÖKOMix, AutoDose, Inverter Motor |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Drum Material | Stainless steel |
| Tub Clean | Yes, with maintenance cycle recommended |
| Water Inlet Hoses | FlexiSafe leak protection system |
| Repair & Spare Parts | Spare parts available for 10 years; user-replaceable parts include door seal, drain filter, inlet hose |
| Safety Features | Anti-flood protection, overheat protection, unbalanced load detection |
Frequently Asked Questions - FFB41610ZM AEG
How to install the washing machine?
Remove all transport bolts, level the machine using adjustable feet, connect water inlet hose to cold water supply, and insert drain hose into standpipe or sink. For detailed steps, refer to the installation manual.
What does the error code 'E10' mean?
Error E10 indicates a water inlet problem. Check that the water tap is open and the inlet hose is not kinked. Also clean the inlet filter in the hose connection.
How to clean the detergent drawer?
Press the lever inside the drawer and pull it out completely. Rinse under warm water and scrub any residue. Use a brush to clean the dispenser cavity. Reinsert once dry.
Why is the machine not spinning?
Check for unbalanced load, ensure the drain hose is not blocked, and that the spin speed is not set to 'No Spin'. Also verify the child lock is not activated.
How to use the steam function?
Select the ProSteam option after choosing a program. It works best for reducing wrinkles and refreshing clothes without a full wash.
What is the maximum load for cotton programs?
For cotton programs, the maximum load is 8 kg. Overloading may reduce cleaning performance and cause excessive vibration.
How to replace the door seal?
Remove the old seal by peeling it from the retaining clips. Clean the area, then fit the new seal by pressing it onto the clips evenly. Ensure the drainage holes are at the bottom.
Does this model have a self-cleaning condenser?
No, this is not a heat pump dryer. It is a washing machine only. For maintenance, run the Tub Clean program monthly.
How to cancel a running program?
Press and hold the Start/Pause button for 3 seconds. The machine will drain and then you can select a new program.
Where to find the filter and how to clean it?
The drain filter is at the bottom front behind the service door. Place a container to catch water, unscrew the filter, remove debris, and screw back tightly.
User questions about FFB41610ZM AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual FFB41610ZM - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FFB41610ZM by AEG.
USER MANUAL FFB41610ZM AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : FFB41610ZM
Category : Washing machine