ThumpSub GO - Subwoofer MACKIE - Free user manual and instructions
Find the device manual for free ThumpSub GO MACKIE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Mackie |
| Model | ThumpSub GO |
| Driver Size | 12 inches |
| Amplifier Power | 200W peak |
| Frequency Response | 40 Hz – 100 Hz |
| Maximum SPL | 118 dB |
| Battery Type | Rechargeable Lithium-ion |
| Battery Life | Up to 6 hours |
| Charging Time | Approximately 4 hours |
| Bluetooth | Yes, version 5.0 |
| Wireless Range | Up to 100 ft (30 m) |
| Input Connections | 2x XLR/TRS combo, 1x RCA |
| Output Connections | 1x XLR Thru, 1x RCA Thru |
| Dimensions (H x W x D) | 15.4 x 14.2 x 16.1 in (391 x 361 x 409 mm) |
| Weight | 25.4 lbs (11.5 kg) |
| Enclosure Type | Ported |
| Mounting | Pole mount with M20 threaded insert |
| Power Supply | AC 100-240V, 50/60Hz (for charging) |
| Accessories Included | Power cord, quick start guide |
| Color | Black |
| Warranty | 1 year limited |
| Cleaning | Wipe with dry cloth; avoid solvents |
| Safety | Do not expose to rain or moisture; keep away from heat sources |
Frequently Asked Questions - ThumpSub GO MACKIE
How do I pair the ThumpSub GO via Bluetooth?
Press the Bluetooth button on the rear panel until the LED flashes blue. Then enable Bluetooth on your device and select 'ThumpSub GO' from the list. Pairing is complete when the LED stays solid blue.
What is the battery life of the ThumpSub GO?
The built-in rechargeable battery provides up to 6 hours of playback at moderate volume. Actual battery life may vary depending on usage and volume level.
Can I charge the subwoofer while using it?
Yes, you can plug in the AC power cord and use the subwoofer while it charges. The unit will charge and operate simultaneously.
How do I connect a microphone or instrument?
Use the XLR/TRS combo inputs to connect a microphone or line-level instrument. Adjust the input level using the gain knob on the rear panel.
What is the pole mount thread size?
The ThumpSub GO features a M20 threaded insert for mounting on a speaker pole. Use a standard 1.375-inch (35 mm) pole.
How do I reset the subwoofer?
To reset the unit, turn it off, disconnect the power, wait 30 seconds, then reconnect and power on. If issues persist, perform a factory reset by holding the Bluetooth and Power buttons simultaneously for 5 seconds.
What is the maximum SPL of the ThumpSub GO?
The maximum SPL is 118 dB peak, providing deep bass for small to medium venues.
Can I daisy-chain multiple ThumpSub GO units?
Yes, use the XLR Thru output to connect additional powered subwoofers. Note that the ThumpSub GO is a powered sub, so you can chain multiple units.
How do I clean the ThumpSub GO?
Wipe the exterior with a soft, dry cloth. Do not use solvents, abrasive cleaners, or water. Keep the vented areas free of dust.
What is the warranty period?
Mackie provides a 1-year limited warranty for the ThumpSub GO. Register your product on the Mackie website for support.
User questions about ThumpSub GO MACKIE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual ThumpSub GO - MACKIE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ThumpSub GO by MACKIE.
USER MANUAL ThumpSub GO MACKIE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MACKIE
Model : ThumpSub GO
Category : Subwoofer