N-SP80MS2 - Intercom TOA - Free user manual and instructions
Find the device manual for free N-SP80MS2 TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Intercom Speaker |
| Model | N-SP80MS2 |
| Brand | TOA |
| Dimensions (W x H x D) | 200 x 120 x 100 mm |
| Weight | 1.2 kg |
| Power Rating | 5 W (RMS) |
| Impedance | 8 ohms |
| Frequency Response | 150 Hz - 12 kHz |
| Material | ABS resin (baffle), steel (back box) |
| Color | White or black (depending on variant) |
| Protection Rating | IP54 (dust and splash resistant) |
| Wiring | Screw terminal block for 2-wire connection |
| Operating Temperature | -10 °C to +50 °C |
| Compatible Amplifier | TOA intercom stations or similar (8 ohm) |
| Mounting | Surface mount (wall or ceiling) |
| Functions | Two-way communication, call button (if equipped) |
| Cleaning Instructions | Wipe with soft dry cloth; do not use solvents. |
Frequently Asked Questions - N-SP80MS2 TOA
What is the maximum distance for wiring the N-SP80MS2?
The maximum recommended wiring distance is 100 meters using 0.5 mm² cable. For longer distances, use thicker cable to avoid signal loss.
Can I use the N-SP80MS2 outdoors?
Yes, it has an IP54 rating, making it suitable for sheltered outdoor use. Avoid direct exposure to heavy rain or snow.
How do I connect the N-SP80MS2 to my amplifier?
Connect the two wires from the amplifier to the screw terminals marked '+' and '-' on the speaker. Ensure polarity is correct for proper phase.
What is the power handling of the N-SP80MS2?
The nominal power is 5 W RMS, with a maximum of 8 W for short peaks. Use an amplifier rated for 8 ohm loads and output around 5-10 W.
Does the N-SP80MS2 include a call button?
No, the N-SP80MS2 is a passive speaker only. It does not have a built-in call button. You may need an external call switch connected to the intercom system.
Is the N-SP80MS2 compatible with other intercom brands?
It works with any amplifier or intercom station that drives 8 ohm speakers at 5-10 W. However, compatibility with specific call light or control signals may require adapters.
How do I clean the N-SP80MS2?
Clean the enclosure with a soft, damp cloth. Do not use abrasive cleaners, alcohol, or solvents as they may damage the plastic surface.
Can I daisy-chain multiple N-SP80MS2 speakers?
Yes, you can connect up to two units in parallel, but ensure the total impedance does not drop below 4 ohms (each is 8 ohms, so parallel gives 4 ohms). Use an amplifier rated for 4 ohm operation.
What tools are needed for installation?
You will need a screwdriver for the terminal screws, drill and screws for mounting (use appropriate anchors for the wall material), and wire strippers for the cable.
The sound is distorted. What could be wrong?
Check the amplifier volume and ensure it is not overdriven. Also verify that the wiring polarity is correct and that the speaker is not damaged. Reduce bass frequencies if the speaker cannot handle them.
User questions about N-SP80MS2 TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual N-SP80MS2 - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N-SP80MS2 by TOA.
USER MANUAL N-SP80MS2 TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : N-SP80MS2
Category : Intercom