EM400MP - Uncategorized MAKITA - Free user manual and instructions
Find the device manual for free EM400MP MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Brushcutter Accessory |
| Brand | Makita |
| Model | EM400MP |
| Usage | Cutting tall grass and brush |
| Head Type | Dual nylon line or metal blade |
| Cutting Diameter | 40 cm |
| Dimensions (L x W x H) | 90 x 25 x 15 cm |
| Weight | 2,5 kg |
| Power Source | Connection to brushcutter motor (not included) |
| Main Functions | Mowing, clearing, cutting thin branches |
| Rotation | Left or right depending on model |
| Maintenance and Cleaning | Clean after each use, check condition of line/blade |
| Safety | Wearing goggles, gloves and hearing protection recommended |
| Spare Parts | Nylon lines, blades, guard, cutting head |
| Repairability | Parts available from authorized dealers |
| Material | Aluminum and reinforced plastic |
| Warranty | 2 years manufacturer's warranty |
| General Information | Accessory compatible with certain Makita brushcutters with quick attachment system |
Frequently Asked Questions - EM400MP MAKITA
How to mount the EM400MP cutting head on my Makita brushcutter?
Ensure the device is turned off and unplugged. Remove the protective cap, align the shaft with the quick attachment system and engage by turning until it stops. Manually tighten the locking button.
What nylon line to use for the EM400MP?
Use nylon line with a diameter of 2.4 mm (0.095 inch) specially for brushcutters. Cut lengths of about 20 cm for each strand.
How to adjust the automatic line length?
The EM400MP is equipped with a Tap & Go system: lightly tap the head on the ground while the motor is running to release additional line. Be careful not to tap too hard to avoid damaging the head.
Can I use a metal blade with this accessory?
Yes, the EM400MP accepts metal blades with a 40 cm diameter. Replace the line guard with the appropriate blade guard provided with your brushcutter.
Is the EM400MP compatible with all Makita brushcutters?
It is compatible with models equipped with the Makita quick attachment system, such as the UX, DX, CX and EX series. Check compatibility in the technical sheet of your brushcutter.
What regular maintenance should be performed?
After each use, clean the head with clean water and dry it. Check the wear of the line or blade. Lightly grease the moving parts with silicone oil every year.
The cutting head overheats abnormally, what to do?
Immediately stop the device and let it cool down. Check that the line is not too long or tangled, and that the ventilation holes are not blocked. If the problem persists, contact an authorized repairer.
Where to buy spare parts for the EM400MP?
You can order spare parts (cutting head, guard, spring, etc.) from official Makita dealers or on their website. Use the part reference number indicated in the manual.
The EM400MP vibrates a lot, is that normal?
A slight level of vibration is normal, but if it becomes excessive, check that the head is properly mounted and the line is balanced. A deformed blade can also cause vibrations. Replace damaged parts.
How to store the accessory off-season?
Clean and dry the head thoroughly. Store it in a dry, frost-free place. To avoid line deformation, fully unwind it before storage.
User questions about EM400MP MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EM400MP - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EM400MP by MAKITA.
USER MANUAL EM400MP MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : EM400MP
Category : Uncategorized