EM401MP - Uncategorized MAKITA - Free user manual and instructions
Find the device manual for free EM401MP MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Makita |
| Model | EM401MP |
| Product Type | Power tool accessory |
| Dimensions (L x W x H) | Approx. 300 x 150 x 200 mm |
| Weight | Approx. 2.5 kg |
| Power Source | 18 V Li-ion battery (not included) |
| Battery Type | Makita LXT 18 V |
| Power | Motor power equivalent to 350 W |
| No-load speed | Variable up to 3000 rpm |
| Cutting capacity | Up to 25 mm in softwood |
| Main functions | Cutting, sanding, polishing |
| Number of speeds | 6 adjustable speeds |
| Maintenance and cleaning | Clean with a dry cloth; lubricate moving parts regularly |
| Safety | Safety stop in case of overload; anti-restart protection |
| Spare parts | Available through Makita after-sales service |
| Repairability | Repairability index: 8.4/10 (according to French standard) |
| Warranty | 2 years |
| General information | Designed for domestic and light professional use |
Frequently Asked Questions - EM401MP MAKITA
How to change the battery of the EM401MP?
Press the unlock buttons on each side of the battery, then pull it outward. Insert the new battery until it clicks into place.
What type of battery to use with this tool?
Use only Makita LXT 18 V batteries (models BL1815, BL1820, etc.). Using other batteries may damage the tool.
How to adjust the rotation speed?
Turn the adjustment dial on top of the tool. The 6 positions are indicated by numbers 1 to 6, with 1 being the slowest speed.
Can I use the EM401MP to cut metal?
Yes, with the right accessory. Use a blade suitable for metal and reduce the speed to avoid overheating.
How to clean the tool after use?
Disconnect the battery, wipe the exterior surfaces with a soft dry cloth. For hard-to-reach areas, use a soft brush. Never use water or solvents.
What to do if the tool stops suddenly?
Check the battery status (recharge if necessary). The stop may be due to overload: let the tool cool down for 15 minutes before restarting.
How to replace the motor brushes?
The brushes are accessible via the side caps. Unscrew them, remove the worn brushes and insert new replacement brushes (Makita reference 191P13-0).
Make sure they slide freely in their housing.
Make sure they slide freely in their housing.
Which accessories are compatible with this model?
The EM401MP accepts cutting, sanding and polishing attachments from the Makita EM400 series. Use only accessories with a 6 mm shank diameter.
How to adjust the cutting depth?
Loosen the depth stop dial, position the stop at the desired depth, then tighten the dial. Test on a scrap piece before starting.
Where to find the complete instruction manual?
The manual is available for free download on notice-facile.com. Search for 'Makita EM401MP' to access the 84-page PDF file.
User questions about EM401MP MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EM401MP - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EM401MP by MAKITA.
USER MANUAL EM401MP MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : EM401MP
Category : Uncategorized