G2400HE - Air conditioner vänEE - Free user manual and instructions
Find the device manual for free G2400HE vänEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | vänEE |
| Model | G2400HE |
| Cooling Capacity | 12,000 BTU/h |
| Coverage Area | Up to 30 m² |
| Dimensions (L x W x H) | 45 x 35 x 70 cm |
| Weight | 25 kg |
| Power Supply | 115 V, 60 Hz, 10 A |
| Refrigerant Type | R-410A |
| Sound Power (indoor) | 55 dB |
| Main Functions | Cooling, Dehumidification, Ventilation |
| Speed Levels | 3 speeds |
| Timer | 24 hours |
| Remote Control | Yes |
| Air Filter | Washable, with cleaning indicator |
| Condensate Tank | 1.5 L, continuous drainage possible |
| Energy Class | A |
| Energy Efficiency Ratio (EER) | 9.5 |
| Repairability | Spare parts available, accessible compressor |
| Safety | Anti-freeze protection, automatic shutdown on overheating |
Frequently Asked Questions - G2400HE vänEE
How to install the G2400HE portable air conditionner?
Place the unit near a window or door to allow hot air exhaust. Extend the exhaust hose and attach it to the included window kit. Plug the unit into a 115 V outlet. Make sure the unit is level to prevent water leaks.
What window height is needed for installation?
The window kit fits vertical or horizontal sliding windows. The minimum recommended height is 70 cm, but the kit can be adjusted. Measure your window before installation.
How to clean the air filter?
Turn off and unplug the unit. Remove the filter located at the back. Wash it with lukewarm water and a mild detergent, rinse and dry completely before reinstalling. Do not use bleach or abrasive products.
What to do if the unit does not cool enough?
Check that the filter is not clogged and clean it if necessary. Make sure the set temperature is lower than the room temperature. Check that the exhaust hose is properly installed and not bent. If the problem persists, contact after-sales service.
How to use the timer?
Press the 'Timer' button on the remote control or control panel. Use the +/- buttons to set the number of hours before automatic shut-off or start-up. The display shows the selected time.
Can I use the air conditioner without an exhaust hose?
No, the exhaust hose is essential to remove hot air. Without it, the unit will not cool properly and may overheat. Always use the supplied hose.
How to empty the water tank?
When the condensate tank is full, the unit stops and an indicator light turns on. Unplug the unit, remove the drain cap located at the back or side, and drain the water into a sink. You can also install a continuous drain hose (not supplied).
What does error code E1 mean?
Code E1 indicates a room temperature sensor fault. Turn off the unit, unplug it for 5 minutes, then plug it back in. If the code persists, contact technical service.
How to set the temperature?
Use the +/- buttons on the control panel or remote control. The adjustment range is 16°C to 30°C. The desired temperature is displayed on the screen.
Where to find spare parts for the G2400HE?
Spare parts (filter, remote control, casters, etc.) are available from vänEE authorized dealers or on the official website. Always use genuine parts to ensure safety.
User questions about G2400HE vänEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual G2400HE - vänEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G2400HE by vänEE.
USER MANUAL G2400HE vänEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : vänEE
Model : G2400HE
Category : Air conditioner