IWCSS60W - Controller Jandy - Free user manual and instructions
Find the device manual for free IWCSS60W Jandy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Controller for pool and spa |
| Brand | JANDY |
| Model | IWCSS60W |
| Dimensions (L x W x H) | 25 cm x 18 cm x 10 cm |
| Weight | 1.5 kg |
| Power supply | 120-240 V AC, 50/60 Hz |
| Maximum consumption | 500 W |
| Protection rating | IP65 |
| Operating temperature | -10°C to 50°C |
| Main functions | Pump control, heating, lighting, filtration, timer programming |
| Display | Backlit LCD screen |
| Controls | Touch keys and rotary knob |
| Connectivity | Compatible with Jandy systems and RS-485 protocol |
| Maintenance and cleaning | Wipe with a soft, damp cloth. Do not use solvents. |
| Safety | Overload, short-circuit, and overheat protection |
| Spare parts | Available from JANDY after-sales service |
| Repairability | Repairability index of 8/10 |
| Warranty | 2 years |
| Package contents | Controller, user manual, temperature sensor |
Frequently Asked Questions - IWCSS60W Jandy
How to install the JANDY IWCSS60W controller?
Fix the wall bracket using the screws provided. Connect the power supply (120-240 V) and connect the equipment cables (pump, heater, etc.) according to the wiring diagram in the manual. Use an RS-485 cable for communication with other JANDY devices.
What to do if the screen stays black?
First check the power supply and the fuse. If the screen still does not light up, contact JANDY after-sales service.
How to adjust the water temperature?
Press the 'Temp' key, then use the rotary knob to select the desired temperature. Confirm by pressing the knob. The temperature can be set from 10°C to 40°C.
Can I program filtration cycles?
Yes, go to the 'Programming' menu and set the start and stop times for the pump. You can create up to 4 cycles per day.
What does error code 'E02' mean?
Code 'E02' indicates a temperature sensor failure. Check the sensor connections and replace if necessary.
How to reset the controller?
Press and hold the 'Menu' and 'OK' keys for 5 seconds until the screen flashes. Release, then confirm the reset.
Is the controller compatible with a variable speed pump?
Yes, the IWCSS60W is compatible with JANDY variable speed pumps. Make sure to configure the pump type in the 'Settings' menu.
How to clean the controller?
Unplug the device, then gently wipe the screen and housing with a slightly damp microfiber cloth. Never use harsh chemicals.
What is the maximum distance between the controller and equipment?
For RS-485 signals, the maximum distance is 300 meters. For temperature sensors, do not exceed 15 meters.
Where can I find spare parts?
Spare parts are available from authorized JANDY dealers or on the official website. Use the model number IWCSS60W to identify parts.
User questions about IWCSS60W Jandy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual IWCSS60W - Jandy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IWCSS60W by Jandy.
USER MANUAL IWCSS60W Jandy
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jandy
Model : IWCSS60W
Category : Controller