X9 R29 - Uncategorized HTW - Free user manual and instructions
Find the device manual for free X9 R29 HTW in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Robot Vacuum |
| Brand | HTW |
| Model | X9 R29 |
| Dimensions (L x W x H) | 34 x 34 x 9 cm |
| Weight | 3.5 kg |
| Power Supply | Li-ion battery 14.8 V / 2600 mAh |
| Battery Life | 120 minutes in standard mode |
| Charging Time | 4 to 5 hours |
| Dustbin Capacity | 600 ml |
| Main Features | Automatic cleaning, weekly scheduling, carpet detection, anti-drop and anti-collision sensors, silent suction |
| Maintenance and Cleaning | Empty the bin after each use, clean the side brushes and HEPA filter every two weeks |
| Safety | Anti-drop sensors (avoids stairs), threshold detection, automatic shut-off in case of overheating |
| Spare Parts and Repairability | Side brushes, HEPA filter, battery, drive wheels available online |
| General Information | 56-page manual available in PDF, support by email and online FAQ |
Frequently Asked Questions - X9 R29 HTW
How to start automatic cleaning?
Press the Start button on the top of the device or use the provided remote control. Make sure the battery is sufficiently charged.
What to do if the vacuum does not charge?
Check that the charging station is plugged in and the charging contacts are clean. If the problem persists, try resetting the device by holding the power button for 10 seconds.
How to schedule a weekly cleaning?
Use the remote control to access the Scheduling menu. Select the desired days and time, then confirm. The vacuum will start automatically.
The vacuum gets stuck under furniture, what to do?
Check that the anti-collision sensors are not obstructed. You can also set no-go zones using the provided magnetic strip.
How to clean the HEPA filter?
Remove the dustbin, then take out the filter. Tap it gently to remove dust. Do not wash it with water; replace it every 3 months.
What does the flashing red light mean?
A flashing red light indicates a fault: low battery, brush blockage, or dirty sensor. Consult the manual for the specific code.
The vacuum makes an abnormal noise, why?
Check if hair or debris is wrapped around the main brush. Clean it and remove any obstruction. If the noise persists, contact customer service.
How to replace the battery?
Unscrew the battery compartment located under the device. Disconnect the old battery and connect the new one, respecting polarity. Screw the cover back on and fully charge before first use.
The vacuum does not detect carpets, what to do?
Make sure the carpet sensors are not dirty. Clean them with a soft cloth. If the problem persists, the carpet may be too thick for the sensor.
Where can I download the full manual?
Go to notice-facile.com and search for the HTW model X9 R29. You can download the PDF for free or request a translation by email.
User questions about X9 R29 HTW
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual X9 R29 - HTW and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X9 R29 by HTW.