AP106 - Receiver ATEN - Free user manual and instructions
Find the device manual for free AP106 ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Presentation Receiver |
| Brand | ATEN |
| Model | AP106 |
| Dimensions (W x D x H) | Approximately 20 cm x 15 cm x 3 cm |
| Weight | Approximately 0.5 kg |
| Power Supply | 5V DC via USB or AC adapter (included) |
| Video Output | HDMI 1.4 / VGA (depending on model variant) |
| Audio Output | 3.5 mm stereo jack |
| Wireless Connectivity | Wi-Fi 802.11 a/b/g/n/ac (2.4/5 GHz) |
| Max Resolution | Full HD 1920x1080 @ 60 Hz |
| Number of Simultaneous Connections | Up to 4 transmitters |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 0% to 80% RH, non-condensing |
| Maintenance | Clean with dry cloth; do not use liquids or solvents |
| Safety | Keep away from water and moisture; use only supplied power adapter |
| Spare Parts | Power adapter, HDMI cable, mounting brackets (if applicable) |
| Repairability | No user-serviceable parts; contact authorized service center |
| Certifications | CE, FCC, RoHS |
| Package Contents | AP106 receiver, power adapter, HDMI cable, quick start guide |
Frequently Asked Questions - AP106 ATEN
How do I connect the AP106 receiver to my display?
Connect the AP106 receiver to your display using an HDMI cable (or VGA, if supported). Ensure both devices are powered on and select the correct input source on your display.
What wireless technology does the AP106 use?
The AP106 uses Wi-Fi 802.11 a/b/g/n/ac on both 2.4 GHz and 5 GHz bands for reliable wireless transmission.
Can I connect multiple transmitters to one AP106?
Yes, the AP106 supports up to 4 simultaneous transmitters. You can switch between them or display them in split-screen mode depending on the model.
What is the maximum resolution supported?
The AP106 supports up to Full HD 1920x1080 @ 60 Hz for crisp video output.
How do I perform a factory reset on the AP106?
Locate the reset button (usually a pinhole) on the device. Press and hold for 10 seconds using a paperclip until the LED blinks, then release. The device will reboot to factory defaults.
Does the AP106 require an internet connection?
No, the AP106 creates its own local Wi-Fi network for direct connection with transmitters. An internet connection is not required for basic operation.
Can I use the AP106 with a laptop via USB?
The AP106 is primarily a receiver for wireless transmitters. To connect a laptop directly, you may need an additional transmitter (sold separately) or use the HDMI input if available.
How do I update the firmware on the AP106?
Download the latest firmware from the ATEN support website. Connect the AP106 to your network via Ethernet (if available) or use a USB drive as instructed in the manual.
What should I do if the video signal is unstable?
Check for wireless interference from other devices. Ensure the transmitter and receiver are within line of sight and within range (typically up to 30 meters). Try changing the Wi-Fi channel in settings.
How do I clean the AP106?
Use a soft dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Ensure the device is unplugged before cleaning.
User questions about AP106 ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AP106 - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP106 by ATEN.
USER MANUAL AP106 ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : AP106
Category : Receiver