HBT-50 - Receiver DataVideo - Free user manual and instructions
Find the device manual for free HBT-50 DataVideo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDBaseT Receiver |
| Brand | DataVideo |
| Model | HBT-50 |
| Input Interface | 1 x RJ-45 (HDBaseT) |
| Output Interface | 1 x HDMI |
| Supported Video Resolution | Up to 1080p@60Hz |
| Transmission Distance | Up to 100 meters (Cat6 cable) |
| Power Supply | PoE (Power over Ethernet) or DC 12V / 1A |
| Power Consumption | Approximately 5W |
| Dimensions (W x D x H) | 100mm x 100mm x 25mm |
| Weight | Approximately 200g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | 20% to 80% (non-condensing) |
| Main Features | Extends HDMI over single Cat6 cable; supports IR pass-through; plug-and-play |
| Maintenance & Cleaning | Wipe with a dry, soft cloth. Avoid moisture and solvents. |
| Safety Precautions | Use only the supplied power adapter. Do not expose to rain or moisture. |
| Spare Parts & Repairability | No user-serviceable parts. Contact DataVideo service center for repairs. |
| General Information | Designed for professional AV installations; supports HDCP 1.4 |
Frequently Asked Questions - HBT-50 DataVideo
How do I connect the HBT-50 receiver?
Connect an HDBaseT transmitter to the HBT-50 using a Cat6 cable. Then connect an HDMI display to the HDMI output. Power the unit via PoE or DC adapter.
What is the maximum transmission distance?
The HBT-50 supports up to 100 meters using Cat6 cable for 1080p signals.
Does the HBT-50 support 4K resolution?
No, the HBT-50 supports up to 1080p@60Hz. For 4K, consider DataVideo HBT-51 or higher models.
Can I use a Cat5e cable instead of Cat6?
Yes, but the maximum distance may be reduced. Cat6 is recommended for optimal performance.
Does the HBT-50 support PoE?
Yes, it supports Power over Ethernet (PoE) IEEE 802.3af. Alternatively, you can use the DC 12V power adapter.
What type of HDMI cable should I use?
Use a standard HDMI cable (Category 2 or higher) for the output connection.
Is IR pass-through supported?
Yes, the HBT-50 supports IR pass-through via the IR extension port. You can control source devices from the display location.
How do I clean the device?
Unplug the device and wipe with a dry, soft cloth. Do not use liquids or solvents.
What power adapter is required?
The HBT-50 requires a 12V DC / 1A power adapter with a center positive connector. Only use the supplied adapter.
Can I daisy-chain multiple HBT-50 receivers?
No, the HBT-50 is a point-to-point receiver. For multiple displays, use a splitter or multiple transmitter-receiver pairs.
User questions about HBT-50 DataVideo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HBT-50 - DataVideo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HBT-50 by DataVideo.
USER MANUAL HBT-50 DataVideo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DataVideo
Model : HBT-50
Category : Receiver