Safe-t Convect 2000 - Electric heater Eurom - Free user manual and instructions

Product type	Electric convector
Brand	Eurom
Model	Safe-t Convect 2000
Power	2000 W
Power supply	220-240 V ~ 50/60 Hz
Dimensions (approx.)	60 x 20 x 40 cm
Weight (approx.)	3.2 kg
Main functions	Convection heating, adjustable thermostat, frost protection
Maintenance and cleaning	Unplug and clean with a soft, dry cloth. Do not use abrasive products.
Safety	Overheat protection, safety switch, automatic shut-off in case of tipping
Spare parts and repairability	Contact Eurom after-sales service for spare parts. Repairs by a professional recommended.
Usage	Indoor use only, do not cover, avoid obstacles in front of grilles
Protection rating	IP24 (splash-proof)
Country of origin	Netherlands (brand)
Warranty	2 years (according to applicable legislation)

Frequently Asked Questions - Safe-t Convect 2000 Eurom

How do I install my Eurom Safe-t Convect 2000 convector?

Place the device on a flat, stable surface, at least 1 meter away from any flammable objects. Plug it directly into a wall socket. Do not use an extension cord.

What is the maximum power of this device?

The convector has a power of 2000 W, suitable for heating a room up to approximately 20 m² (depending on insulation).

How do I adjust the temperature?

Turn the thermostat knob to select the desired temperature. The device automatically stops when the room reaches the set temperature.

Can I use the convector in a bathroom?

Yes, the device has an IP24 protection rating, making it suitable for damp rooms like bathrooms, provided safety distances from water points are respected.

How do I clean the device?

Always unplug the device and let it cool down before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Never immerse in water.

What should I do if the device does not heat?

First check that the thermostat is set above room temperature. Make sure the device is properly plugged in and the socket works. If the problem persists, contact after-sales service.

The device turns off by itself, is this normal?

Yes, it is normal. The convector is equipped with a thermostat that cuts off heating when the set temperature is reached. It automatically turns back on if the temperature drops.

Can I cover the device to protect it?

No, never cover the device. This could cause overheating and a fire risk. Always keep the ventilation grilles clear.

Where can I find spare parts?

Spare parts are available from Eurom after-sales service. Check the manual for contact details or visit the official website.

What is the noise level of the device?

The convector operates silently as it does not use a fan. You will only hear a slight click from the thermostat during heating cycles.

USER MANUAL Safe-t Convect 2000 Eurom

White EUROM solar heating appliance with digital display and ventilation slots (no visible text or symbols on main body)

Safe-T-Convect 2200

Art.nr. 360509

Safe-T-Convect 2000

Art.nr. 360516 (Swiss plug)

This product is only suitable for well insulated spaces of occasional use.

Symbol of a trash bin with crossed lines indicating no waste or discharge, and a solid black rectangle below (no text or labels)

Symbol of a trash bin crossed with no text or numbers, representing environmental restriction (no text present)

Thank you very much for choosing for a EUROM device. You have made a good choice! We hope you will be satisfied about its functioning. To get maximum profit from your product, it is important to read this manual attentive and totally before use, and to understand what is written. Read especially the safety instructions: they are there to protect you and your environment. Keep the manual in a safe place for future reference. Store also the package: that is the best protection for your product in times of no-use. And if you at any time pass the appliance on, pass on the manual and package too.

We wish you a lot of fun with the Safe-t-Convect!

Eurom

Kokosstraat 20

8281 JC Genemuiden (NL)

[e-mail]

www.eurom.nl

This manual has been complied with the utmost care. Nevertheless, we reserve the right to optimize this manual at any time and to adjust it technically. The image used may differ.

Symbol Explanation

Do not cover the device

Technical data

Supply voltage	220-240V~50
Maximum capacity	2200 W (2000 W Switzerland)
Settings	900-1300-2200 W (800-1200-2000 W Switzerland)
Timer	+
Thermostat	+
Remote control	+
Dimensions	18 x 68 x 41 cm
Weight	4,5 kg

Warning electric cables

Safety warning - general

1. Read the user instructions carefully and completely before using (and installing) this device. Keep the instruction leaflet somewhere safe so that you can consult it and pass it on in future.
2. Before use, check your new device (including cable and plug) for any visible damage. Never use a damaged device but take it back to the supplier for a replacement.
3. In the event of incorrect usage or installation, there is a risk of electric shocks and/or a fire hazard.

Warnings device position

1. Do not place the device near, under or facing an electrical socket and not in the vicinity of an open fire or heat source.
2. Do not use the device nearby or facing furniture, curtains, paper, clothing, bedding or other flammable materials. Keep at least 1 metre from device!
3. Do not use the heater outdoors or in areas that are smaller than 15m^3 .
4. The device contains hot and/or glowing and sparking components. Do not, therefore, use where fuels, paint, flammable fluids and/or gases are stored. Do not use the device in an environment that poses a fire risk, e.g. near gas tanks, gas pipes or aerosols. This is an explosion and fire risk!
5. Only use the device when the feet have been installed. Using the device without feet creates a significant risk of fire. Always remove the plug from the socket if you are installing/removing.
6. This device is not suitable for wall or ceiling installation.
7. Do not use this device in the immediate vicinity of a bath, shower or swimming pool.

8. This device is not suitable for use in damp spaces such as bathrooms, wash rooms etc. Never locate the device near water-points and reservoirs (tap, bath, shower, toilet, sink, swimming pool, etc.). Make sure that the device cannot fall into water and that it cannot be penetrated by water. If the device falls into water make sure you remove the plug from the socket! Do not use a device that is wet inside but take it to be repaired. Never immerse the device, cable or plug in water or any other fluid and never touch device with wet hands.

9. The air around the device must be able to circulate freely. Never install it too close to walls or large objects and never under a shelf, cupboard, curtains or similar. When locating the device, make sure you have the following minimum free space:

Front, minimum free space 50 cm Back, minimum free space 30 cm Sides, minimum free space 50 cm Top, minimum free space 100 cm

1. Always place the unit on a sturdy, flat horizontal surface.
2. The base on which the device is placed must not be made of flammable materials. It must be resistant to temperatures of at least 125^ C without burning, melting, deforming or bursting into flames. Check regularly to ensure that the surface is not overheating; this could be dangerous!
3. Never place the device on surfaces such as beds or deep-pile carpet as openings could be blocked.
4. Do not place the device near an open window as rain could blow in; do not place on wet surfaces and avoid any liquids being spilt nearby. Do not place the device behind a door or along a walking route to avoid accidental trips.

Warnings - use

1. Do not use additions/accessories on the device that have not been supplied or approved by the manufacturer.
2. Only use the device for its intended purpose and in the manner set out in this instruction leaflet.
3. Some parts of this device will get very hot and could cause burns. You must pay particular attention to children, vulnerable persons and pets that are present near the device. Never leave them alone with a working device.
4. Never cover or block the device; it will overheat and this could lead to a fire risk. Never hang or place objects such as clothing, blankets, cushions, paper, etc. on the device. The minimum distance of 1 metre between the device and flammable materials must always be applied. Ventilation openings should never be blocked as this may pose a fire risk. Never use the device to dry clothing or place anything on it. Do not let anything lean against the device!

5. The device is exclusively intended for normal, household usage. Only use for providing heat in your home.

6. The connection voltage and frequency, as given on the device, must correspond to that of the socket to be used. The electrical socket to be used must be an earthed connection. The electrical installation must be protected via a 30 mA earth leakage circuit breaker. The electrical socket that you are using must be to hand at all times in order to be able to remove the plug from the socket in the event of an emergency.

7. To avoid overloading and/or fuses being blown, do not use any other equipment on the same socket or electrical group as the one used for the device.

8. Unroll the electric cable for the device fully before inserting the plug into the socket and ensure that the electrical cable does not come into contact with the fireplace or get hot. Do not run the electrical cable under carpet, cover with mats, runners or similar and do not place in areas that are walked on frequently. Ensure that it cannot be stepped on and that no furniture is placed on top of it. Do not bend the electrical cable around sharp corners and do not roll up too tightly after use! Prevent the electrical cable coming into contact with oil, solvents and sharp objects. Check the cable and plug regularly for damage. Do not bend or pinch the electrical cable and do not wind it around the device; this could damage the insulation!

9. The use of an extension cable is not advised as this can lead to overheating and fire. If the use of an extension cable is unavoidable, make sure that it is not damaged and that it is an approved extension cable with a minimum diameter of 3 × 2.5 mm^2 and a minimum permitted capacity of 2500 Watt. Always fully extend the cable in order to prevent overheating.

10. Only connect the device to a fixed socket. Do not use multi-plug adapters or similar.

11. During use, the plug may begin to feel warm; this is normal. If it's really warm, there may be something wrong with the socket. Please contact your electrician.

12. Always turn off the device and remove the plug from the power socket: Never turn the device off using the plug!

13. Prevent foreign objects entering the radiation/ventilation or outlet openings on the device. This may cause electric shock, fire or damage.

14. Never leave a working device unattended but switch off and then remove the plug from the socket. Always remove the plug from the socket when the unit is not in use! Always remove plug by pulling on the plug itself; never pull on the electrical cable!

15. Apart from manual use, this device can also be operated via or a timer. However you operate it, make sure that the safety guidelines are taken into account at all times! Do not operate the device with an additional time clock, timer, volume control or any other device that automatically turns on the device.
16. This device gets hot during use. Never touch the device when it is on or shortly thereafter; it could burn you.
17. Never operate the device with wet hands.

Who can use the device?

1. Children younger than 3 must be kept out of the vicinity of the device unless they are continuously supervised.
2. Children between the ages of 3 and 8 may only switch the device on or off if it is set up or installed at its usual location and they are supervised or have received instructions regarding the safe use of the device and understand the corresponding hazards. Children between the ages of 3 and 8 may not insert the plug into the socket, adjust the device settings or clean or maintain it.
3. This device can only be used by children from the age of 8 and elderly persons and persons with diminished physical or mental capacities or a lack of experience and expertise if they are supervised or have received instructions regarding the safe use of the device and understand the corresponding hazards.
4. Children may not clean or maintain the device without supervision.
5. Children may not play with the device.

Warnings for maintenance

1. Keep the device clean. Dust, dirt and/or deposits in the device often lead to overheating. Ensure that this type of build-up is regularly removed.

2. Always switch the device off, remove plug from socket and let the device cool down before you:

3. clean the device

4. users - maintain the device.

5. touch or move the device.

6. Never switch the device on if you have noticed damage to the device itself, the cable or plug or if it does not work properly,

makes strange noises, smells odd or you can see smoke, or if it has fallen or shows any other signs of damage. Remove the plug from the socket immediately. Take the entire device back to your supplier or a recognised electrician to be checked and/or repaired. Always ask for original parts to be used.

1. The device may only be opened and/or repaired by a competent and qualified person. Do not carry our your own repairs as this could be dangerous! Repairs carried out by unauthorised persons or changes made to the device could damage the dust/waterproof capacity of the device and will nullify the guarantee and the manufacturer's liability.
2. If the electrical cable is damaged, it must be replaced by the manufacturer, their service department or somebody with similar qualifications in order to prevent creating a hazard.

Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or personal injury. They will invalidate the guarantee and the supplier, importer and/or manufacturer shall not be liable for the consequences.

Description and installation

A. Convector front
B. Control panel with LCD screen
C. Foot
D. ON/OFF switch

E. Fan opening
F. Heat grille
G. Remote control

Remove all packaging material and keep out of reach of children. After removing packaging, check the appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your vendor for inspection or replacement.

Note: Attach the feet first before using the heater:

• Turn the heater upside down. Place a blanket (or something similar) under the heater to prevent damage!
• Slide the feet from the side so that the grooves go as far as they can over the protruding brackets; this will ensure that the threaded holes will align correctly.
• Securely attach the feet to the heater using the short self-tapping screws.
• Return the heater to the upright position.
• Select a suitable location for the device taking into account all the aforementioned wanings in this manual.
• Check if the ON/OFF switch (D) is set to 'OFF' (O).
• Fully extend the power cord and plug into a suitable 220-240V socket. Only connect the heater to an earthed socket! To prevent the circuit overloading, check that no other appliances are connected to the same group.

Set-up and operation

1. Output button
2. Celsius↔Fahrenheit button
3. Receiving point – remote control

4. Stand-by button

5. Ventilator button

6. Higher button
7. Lower button
8. Timer

Set the ON/OFF switch (D) to 'ON' (I). The display shows the current temperature (left) and the set temperature (right) which is 25^ C as standard. The device is now in stand-by.

You can now operate the device using the buttons on the display or the remote control. Both offer the same buttons. If you are using the remote-control, point it towards the receiving point (3) on the device.

- Start the device by pressing the stand-by button (4). The device will select the function 'heat at high power'. 2200W (Switzerland 2000W). If the set temperature is 2 degrees higher than the current temperature, the device will heat the space as a convector.

• Pressing on the Output button (1) several times allows you to set another output: 2200W→1300W→900W (Switzerland: 2000W→1200W→800W). When heating, you can switch on air circulation using the ventilator button (5); this will ensure the heat is distributed quicker. Pressing this button again will switch the fan off.
• Pressing on the output button once again will turn on the frost-protection setting: the thermostat will set to 7°C automatically, the frost icon will appear and if the fan was on, this will switch off. If the temperature falls under 5°C, the device will start to work on low power.
• If you press the output button again, the device will switch back to 2200W (Switzerland: 2000W) without fan option and the process will repeat.
• You can use the higher/lower buttons (6 and 7) to increase/decrease the set temperature. The device has a thermostat and will provide heat until the set temperature is reached. The temperature will then be maintained; the device will switch itself back on automatically if the temperature drops by 2°.
• The number of hours the device stays on can be set using the timer button. 1x press = 1 hr, 2x presses = 2 hrs and so on until max. 15 hours. The display will show the set number of hours. Pressing this button again will switch the timer off.
• Pressing the Celsius↔Fahrenheit button will change the display from °C to °F and vice versa.
• Press the stand-by button again in order to switch off. Then press the ON/OFF switch to OFF and remove the plug from the socket.

NB: the device will only provide heat if the set temperature (right on the display)

is at least 2^ higher than the current temperature (left on the display)!

Safety features

Tipping safeguard

The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it inadvertently falls over. When the heater is returned to its upright position, it will resume functioning as normal but, before reusing, switch off, unplug and check for damage. Do not use the heater if it is damaged or malfunctioning, but have it inspected/ repaired!

Overheating safeguard

In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh air. As mentioned above, this is generally caused by (partially) covering the heater, obstructing the air intake and/or outlet grills or installing the heater too close to a wall or something similar. When the heater has cooled down sufficiently, it will in principle start again automatically, however if you do not remove the cause of the cut-off then this will probably be repeated. Regular

overheating can give rise to irreparable damage. In case of overheating, switch off the heater and unplug. Give the heater time to cool down, remove the source of the overheating and use as normal. If the problem persists or if you have not been able to trace the source of the overheating, turn the heater off immediately and unplug. Contact a servicing point to have the heater repaired.

Cleaning and maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool down before cleaning or carrying out maintenance work.

• Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
• Use a vacuum cleaner to carefully remove any dust and dirt from the grills and ensure that the air intake and outlet openings are clean. Be careful not to touch or damage any internal parts during cleaning!
  • The heater contains no other parts which need maintenance.
• At the end of the season, store the cleaned heater in the original packaging if possible. Store it upright in a cool, dry and dust-free place.

Removal

Symbol of a trash bin crossed with two diagonal lines, no text or labels present

In the EU this symbol indicates that this product may not be disposed of as ordinary household waste. Old equipment contains valuable materials, suitable for recycling. These materials should be made suitable for reuse in order to prevent any adverse effects to health and the environment caused by unregulated waste collection. Therefore, please make sure that you bring old equipment to a designated collection point. Alternatively, contact the original supplier, who can make sure that as many of the components as possible can be recycled.

CE-statement

See page 86.

Remerciements

Prohibition symbol of a document crossed out by a diagonal line, enclosed in a circle (no text or numbers present)

Protection anti-surchauffe

Symbol of a trash bin crossed with two crossed lines, no text or labels present

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Symbol of a trash bin crossed out by two diagonal lines (no text or labels)

CE-prohlášení

Vis strana 86.

Đakujeme

Symbol of a trash bin crossed out by two diagonal lines (no text or labels)

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

declares the following device in sole responsibility:

Product: convector heater

Brand name: EUROM

Model: Safe-T-Convect 2200 / Safe-T-Convect 2000

Item number: 360509 / 360516

Complies with the following harmonization rules:

Low Voltage Directive:	LVD 2014/35/EU
Electromagnetic compatibility Directive:	EMC 2014/30/EU
Restriction of Hazardous Substances RoHS Directive:	2011/65/EU&(EU)2015/863
Framework Directive Ecodesign requirements:	ERP 2009/125/EC
Regulation Ecodesign requirements for Individual room heaters:	(EU) 2015/1188
Regulation Ecodesign requirements Electricity Consumption in standby and off state:	1275/2008/EC

Applied harmonized standards:

EN 60335-1:2012+A11+A13+A1+A14+A2

EN 60335-2-30:2012+A11

EN 62233:2008

AfPS GS 2019:01 PAK

EN 55014-1:2017

EN 55014-2:2015

EN 61000-3-3:2013

EN 61000-3-2:2014

Genemuiden, 29-04-2020

W.J. Bakker, alg. Dir.

EUROM

Kokosstraat 20

8281 JC Genemuiden - NL

[e-mail]

www.eurom.nl

290420