CGM-02S - Rear Camera CRUX - Free user manual and instructions
Find the device manual for free CGM-02S CRUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rear View Camera |
| Brand | CRUX |
| Model | CGM-02S |
| Compatible Vehicles | Universal fit for most vehicles with 12V DC power |
| Dimensions | Approx. 2.5 x 1.5 x 1.2 in (63 x 38 x 30 mm) |
| Weight | Approx. 0.2 lb (90 g) |
| Power Source | 12V DC from vehicle reverse light circuit |
| Video Output | Composite video (RCA connector) |
| Resolution | 720x480 (NTSC) / 720x576 (PAL) |
| Viewing Angle | 170° diagonal |
| Night Vision | Built-in IR LEDs for low light visibility |
| Waterproof Rating | IP67 (waterproof and dustproof) |
| Installation Type | Surface mount or license plate frame mount |
| Operating Temperature | -20°C to 60°C |
| Maintenance | Clean lens with soft dry cloth; avoid abrasive cleaners |
| Safety | Use only with 12V systems; avoid short circuits; disconnect battery before installation |
| Spare Parts & Repairability | Contact CRUX customer service for replacement parts; no user-serviceable parts inside |
| Included Accessories | Camera, 10 ft video cable, power cable, mounting bracket, screws |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - CGM-02S CRUX
How do I install the CRUX CGM-02S rear camera?
Mount the camera on the rear of the vehicle using the provided bracket and screws. Connect the power wire to the reverse light circuit (12V) and the video cable to a compatible monitor. Ensure all connections are secure and weatherproof.
Can this camera be used with any monitor?
Yes, the CGM-02S outputs standard composite video (RCA). It can be used with any monitor that has a composite video input, such as aftermarket head units or dedicated backup camera displays.
Is the camera waterproof?
Yes, the camera has an IP67 waterproof rating, meaning it is fully protected against dust and can withstand immersion in water up to 1 meter for 30 minutes.
How do I connect the camera to power?
Connect the red power wire to the vehicle's reverse light positive terminal and the black wire to ground. The camera will automatically turn on when the vehicle is put into reverse.
What is the viewing angle of the CGM-02S?
The camera has a 170° diagonal viewing angle, providing a wide field of view behind the vehicle to enhance safety.
Does the camera work in low light?
Yes, it features built-in infrared LEDs for night vision, allowing clear images in low-light conditions up to about 10 feet.
Can I mount the camera on a license plate?
The camera can be mounted using the license plate bracket included, which attaches to the existing license plate screws for a clean installation.
What should I do if the camera shows no image?
Check the power connection to the reverse light circuit, ensure the monitor is set to the correct input, and verify the video cable is securely connected. Test with a known working monitor if possible.
Is the camera compatible with both NTSC and PAL systems?
Yes, the camera supports both NTSC and PAL video standards. It automatically selects the appropriate format based on the connected monitor.
How do I clean the camera lens?
Gently wipe the lens with a soft, dry microfiber cloth. Avoid using harsh chemicals or abrasive materials that could scratch the lens or damage the waterproof seal.
User questions about CGM-02S CRUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Rear Camera in PDF format for free! Find your manual CGM-02S - CRUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CGM-02S by CRUX.
USER MANUAL CGM-02S CRUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CRUX
Model : CGM-02S
Category : Rear Camera