UC-2 - Rear Camera CRUX - Free user manual and instructions
Find the device manual for free UC-2 CRUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rear View Backup Camera |
| Brand | CRUX |
| Model | UC-2 |
| Compatibility | Universal fit for vehicles with aftermarket or factory monitors |
| Image Sensor | 1/2.7-inch CMOS |
| Resolution | 1280 x 720 pixels |
| Viewing Angle | 170 degrees diagonal |
| Night Vision | 6 IR LEDs for automatic low-light illumination |
| Waterproof Rating | IP67 weatherproof housing |
| Video Output | Composite video signal (RCA connector) |
| Video System | NTSC / PAL switchable |
| Power Supply | 12V DC (negative ground) |
| Operating Temperature | -20°C to +70°C |
| Mounting Type | License plate bracket or flush mount |
| Dimensions | 62 x 42 x 32 mm |
| Weight | 150 g (including cable) |
| Housing Material | Aluminum alloy with ABS plastic |
| Installation | Wired connection with power and video cables |
| Package Contents | Camera, power cable, video cable, mounting hardware |
| Maintenance | Clean lens with soft dry cloth; check connections periodically |
| Safety Approvals | CE, FCC, RoHS compliant |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - UC-2 CRUX
Is the CRUX UC-2 compatible with my vehicle?
The UC-2 is a universal rear camera designed to work with most aftermarket monitors and factory screens that accept composite video input. It requires a 12V power source and an RCA video connection. Check your monitor's input options before purchase.
How do I install the camera?
Mount the camera on your license plate or rear bumper using the included bracket. Connect the video cable to your display and wire the power lead to the reverse light or a constant 12V source. Secure all connections with electrical tape or heat shrink for reliability.
Can the camera be used at night?
Yes, the UC-2 features 6 infrared LEDs that automatically activate in low-light conditions, providing clear images up to 15 meters in darkness, ensuring safe reversing at night.
What is the viewing angle?
The camera offers a 170-degree diagonal viewing angle, covering your vehicle's blind spot and giving a wide, clear view of the area behind you.
Is the camera waterproof?
Yes, the housing is rated IP67, meaning it is dust-tight and protected against temporary immersion in water. It can withstand rain, car washes, and harsh weather conditions.
How do I switch between NTSC and PAL?
The camera has a small switch or jumper wire to select the video system. Refer to the manual for the exact location. Set it to match your monitor's format for optimal performance.
The image is upside down. How can I fix it?
The UC-2 supports mirror/upside-down adjustment. If your image appears inverted, locate the built-in image flip switch on the camera or use the settings on your monitor if available. Adjust until the view is correct.
What is the maximum cable length?
The included video cable is approximately 6 meters (20 feet), sufficient for most vehicles. For longer runs, use a high-quality coaxial extension with an RCA coupler.
Does the camera record video?
No, the UC-2 is a live-view camera only. It does not have built-in recording capabilities; it connects to a monitor or a dashboard recorder with video input.
How do I maintain the camera?
Regularly clean the lens with a soft, dry microfiber cloth to remove dust and debris. Avoid using harsh chemicals. Periodically inspect the wiring and mounting bracket for corrosion or looseness.
User questions about UC-2 CRUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Rear Camera in PDF format for free! Find your manual UC-2 - CRUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UC-2 by CRUX.