CRUX

CTY-02T - Rear Camera CRUX - Free user manual and instructions

Find the device manual for free CTY-02T CRUX in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CRUX CTY-02T - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Rear View Camera
Brand CRUX
Model CTY-02T
Video Output Composite (RCA) / CVBS
Image Sensor 1/3-inch CMOS
Resolution 480p (640 x 480 pixels)
Viewing Angle 170° diagonal
Night Vision Yes, with built-in IR LEDs
Waterproof Rating IP67
Power Supply 12V DC (10-16V range)
Current Draw < 100 mA
Operating Temperature -20°C to +70°C
Dimensions 2.5 x 1.5 x 1.2 inches (approx.)
Weight 1.2 oz (34 g)
Mounting Type Flush mount or bracket mount
Image Orientation Selectable mirror/normal via switch
Parking Guidelines Built-in adjustable grid lines
Cable Length 6 ft (1.8 m) with RCA connector
Trigger Cable Yes, for reverse gear activation
Housing Material Aluminum alloy
Lens Material Glass
Maintenance Clean with a soft, dry cloth
Safety Short-circuit and reverse polarity protection
Spare Parts Not user-serviceable; contact CRUX support
Certifications FCC and CE compliant

Frequently Asked Questions - CTY-02T CRUX

How do I install the CRUX CTY-02T rear camera?
Connect the RCA video cable to your display's reverse input and the red power wire to your reverse light's positive terminal. Mount the camera securely using the provided bracket.
Is the CTY-02T compatible with my existing car stereo?
Yes, it outputs a standard composite video signal (CVBS) that works with most aftermarket head units and factory displays with RCA or A/V input.
Can the camera handle rain and moisture?
Absolutely. The CTY-02T has an IP67 waterproof rating, so it can withstand heavy rain and car washes without damage.
How do I adjust the parking guidelines on the screen?
If your head unit does not have its own guidelines, one or more grid lines are embedded in the video signal and can be toggled or positioned by adjusting the DIP switches on the cable.
Is night vision included?
Yes, the camera features built-in IR LEDs that automatically illuminate dark areas for a clear view at night.
How do I set the image to mirror mode?
The camera has a mirror/normal switch on the RCA cable. Slide it to the position that shows a rear-view mirror orientation when using the display.
What if the image is black and white or fuzzy?
First, check the video connection and ensure the camera is getting clean 12V power. A poor ground or low voltage can degrade the signal. If the issue persists, verify the RCA cable is properly shielded.
Can I replace the camera if it gets damaged?
The CTY-02T is a sealed unit and cannot be disassembled for repair. However, the entire camera is replaceable; contact CRUX customer support for a replacement part.
How long is the cable that comes with the camera?
The camera includes a 6-foot cable with a molded RCA connector. For most vehicles, this is sufficient to reach the head unit. Extension cables are available if needed.
Does the camera have a wide viewing angle?
Yes, it offers a 170° diagonal field of view, which helps eliminate blind spots behind your vehicle.

User questions about CTY-02T CRUX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Rear Camera in PDF format for free! Find your manual CTY-02T - CRUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CTY-02T by CRUX.

USER MANUAL CTY-02T CRUX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CRUX

Model : CTY-02T

Category : Rear Camera