KIA SPORTAGE 3 - SUV

SPORTAGE 3 - SUV KIA - Free user manual and instructions

Find the device manual for free SPORTAGE 3 KIA in PDF.

📄 404 pages English EN ⬇ Download 💬 AI Question ❓ 13 questions ⚙️ Specs
Notice KIA SPORTAGE 3 - page 5
5 / 404
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeSUV
BrandKIA
ModelSPORTAGE 3
Overall Length4440 mm
Overall Width1855 mm
Overall Height1635 mm (without roof rails) / 1645 mm (with roof rails)
Wheelbase2640 mm
Front Track1618 mm (tires 215/70R16) / 1611 mm (225/60R17) / 1600 mm (235/55R18)
Rear Track1619 mm (tires 215/70R16) / 1612 mm (225/60R17) / 1601 mm (235/55R18)
Fuel Tank Capacity58 L
Recommended FuelUnleaded gasoline octane index (R+M)/2 87 (RON 91) or higher
Tires (depending on version)215/70R16, 225/60R17 or 235/55R18
Cold Tire Pressure230 kPa (33 psi) front and rear (normal tires)
Engine Oil (change)API SM/ILSAC GF-4, viscosity SAE 5W-20 or 5W-30, volume 4.6 L
CoolantAntifreeze and water mixture (ethylene glycol), volume 6.7 to 6.8 L depending on version
Brake FluidFMVSS116 DOT-3 or DOT-4, volume 0.7 to 0.8 L
TransmissionManual or automatic (6-speed, depending on version)
SafetyFront, side and curtain airbags, ABS, ESC, seatbelt pretensioners
Interior EquipmentAdjustable front seats (manual or electric), active headrests, seat heating, manual or automatic air conditioning, audio with steering wheel controls, cruise control, panoramic sunroof (optional)
MaintenanceOil change recommended every 12,000 km or 12 months

Frequently Asked Questions - SPORTAGE 3 KIA

How to adjust the driver seat manually?
To adjust the driver seat manually, lift the sliding lever located under the front of the seat to slide it forward or backward. To recline the backrest, pull the recline lever on the outside of the seat, lean to adjust the angle, then release the lever making sure it locks. The cushion height is adjusted by operating the height lever up or down repeatedly.
How to install a child seat in the rear?
Install the child seat on the rear bench. Route the three-point seatbelt through the child seat according to the manufacturer's instructions. Buckle the belt then pull it all the way to switch to automatic locking mode (you will hear a clicking sound when retracting). Push down on the child seat to remove slack and check that it is securely fastened. Preferably use LATCH anchors if available.
What to do in case of a flat tire?
Park the vehicle on a flat, stable surface. Apply the parking brake and turn on the hazard lights. Take out the spare tire, jack, and tools from the trunk. Place the jack under the designated lifting point near the flat tire. Raise the vehicle, unscrew the nuts, replace the tire, then retighten the nuts. Lower the vehicle and tighten the nuts to the recommended torque (9-11 kg·m). Store the flat tire.
How to check the engine oil level?
Park the vehicle on level ground, engine off and cold. Open the hood and remove the oil dipstick. Wipe it clean, reinsert it fully, then remove it again. The level should be between the MIN and MAX marks. If necessary, add oil of the recommended viscosity (SAE 5W-20 or 5W-30) through the filler cap. Do not exceed the MAX mark.
How to use the cruise control?
Cruise control allows you to maintain a constant speed without using the accelerator pedal. To activate it, press the ON button on the steering wheel, then accelerate to the desired speed and press the SET/- button. To increase or decrease speed, use the RES/+ or SET/- buttons. To deactivate, press OFF or brake.
How to unlock the tailgate in an emergency?
If the tailgate does not open normally, you can unlock it manually. Fold down the rear seat to access the trunk interior. Locate the emergency release lever (often fluorescent color) near the tailgate lock. Pull this lever to unlock the tailgate from the inside.
How to switch to sport mode on the automatic transmission?
With the automatic transaxle, you can switch to sport mode by moving the gear lever to the left from the D (Drive) position into the position marked + and -. In sport mode, you can change gears manually by pushing the lever forward to upshift and backward to downshift. The engaged gear is displayed on the instrument panel.
How to clean the seat belts?
To clean the seat belts, use a solution of warm water and mild soap. Pull the belt all the way out and gently rub with a soft cloth. Never use bleach, harsh detergents, or abrasive products as they may weaken the fabric. Allow to dry completely before letting the belt retract.
What tire pressure is recommended for the Kia Sportage 3?
For the original tires (215/70R16, 225/60R17 or 235/55R18), the recommended cold pressure is 230 kPa (33 psi) for front and rear wheels. For the compact spare tire, the pressure is 420 kPa (60 psi). Check the pressure regularly, especially before long trips.
How to reset the maintenance indicator (service due)?
The procedure may vary by model year. Generally, turn the ignition on without starting the engine. Press the trip odometer reset button (or the Trip button) until the maintenance light flashes. Hold it for a few seconds until the light turns off. Consult the owner's manual for the exact procedure.

User questions about SPORTAGE 3 KIA

3 questions about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

How to change the display unit of the outside temperature on a KIA SPORTAGE 3?
Frequently Asked Questions - 15/03/2026
Response Notice-Facile

To change the display unit of the outside temperature on your KIA SPORTAGE 3, you first need to access the temperature mode of the trip computer, which shows the outside temperature around the vehicle.

Steps to follow:

  • Turn the ignition key to the ON position (without starting the engine)
  • Press the TRIP button located near the instrument cluster (dashboard) successively to navigate through the different modes displayed on the odometer. Continue until you see “Outside Temperature”
  • Once the outside temperature mode is selected, press the RESET button for more than one second to toggle between the measurement units: degrees Celsius (°C) and degrees Fahrenheit (°F)

After performing this operation, the unit change will take effect immediately. The thermometer in your SPORTAGE 3 operates within a range of -40°C to 80°C (-40°F to 176°F) and will now display the temperature in the chosen unit. If the outside temperature option does not appear when navigating through the modes, it means that your vehicle is not equipped with this optional feature.

Respond (be the first)
What is the role and maintenance of the clutch fluid in a KIA Sportage 3?
Frequently Asked Questions - 01/02/2026
Response Notice-Facile

The clutch fluid in your KIA Sportage 3 plays an essential role: it transmits the pressure applied to the clutch pedal to the disengagement mechanism, allowing the engine to be disconnected from the transmission for gear changes. Like brake fluid, it is a hydraulic fluid that ensures smooth and precise transmission of hydraulic force.

Required fluid type and level check

The KIA Sportage 3 requires hydraulic brake fluid that meets the DOT 3 or DOT 4 specification. Regularly check the fluid level in the reservoir located under the hood, near the master cylinder. The level should be between the “MIN” and “MAX” marks indicated on the side of the reservoir. A low level can lead to difficulties when changing gears or a loss of clutch control.

Maintenance schedule

The manufacturer's maintenance schedule recommends inspecting the clutch fluid at every 12,000 km or 12 months, whichever comes first. This inspection ensures that the level remains correct and that there are no leaks in the lines and fittings. If the fluid shows signs of degradation (dark color, cloudy appearance) or if there is a leak, it should be replaced promptly.

Handling precautions

  • Handle the clutch fluid carefully, avoiding any contact with the eyes. In case of eye contact, rinse immediately with fresh water and consult a doctor.
  • The fluid must never touch the vehicle's paint, as it causes significant damage to the bodywork.
  • Never use fluid that has been exposed to open air for an extended period, as its quality can no longer be guaranteed.
  • Keep the clutch system tightly sealed to prevent the fluid from absorbing moisture, which would degrade its performance.

Regular maintenance of the clutch fluid ensures the proper functioning of the system and safe driving. If in doubt, consult an authorized KIA dealer who has the appropriate products and tools to service your vehicle.

Respond (be the first)
What type of brake fluid should be used and how to maintain the braking system on a KIA Sportage 3?
Frequently Asked Questions - 01/02/2026
Response Notice-Facile

The brake fluid is an essential component of the braking system of your KIA Sportage 3. Here are the key points to know for its use and maintenance:

Recommended brake fluid type

For your KIA Sportage 3, it is important to use a brake fluid that meets the manufacturer's specifications, generally a DOT 4 type fluid. This type of fluid offers a good balance between performance and heat resistance, which is crucial for ensuring effective and safe braking.

Checking the fluid level

  • The brake fluid reservoir is located under the hood, near the master cylinder.
  • Regularly check that the level is between the minimum and maximum marks.
  • A low level may indicate a leak or significant wear of the brake pads.

Maintenance and replacement

  • Brake fluid absorbs moisture over time, which can reduce its effectiveness and cause corrosion of the system.
  • It is recommended to replace the fluid approximately every 2 years to maintain optimal performance.
  • The replacement should be carried out by a professional equipped to properly bleed the system and avoid the presence of air bubbles.

Usage precautions

  • Brake fluid is corrosive and can damage paint and certain surfaces.
  • In case of contact with paint, rinse immediately with clear water.
  • Handle it with care and avoid direct contact with skin.

By following these recommendations, you contribute to the safety and longevity of the braking system of your KIA Sportage 3.

Respond (be the first)

Download the instructions for your SUV in PDF format for free! Find your manual SPORTAGE 3 - KIA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPORTAGE 3 by KIA.

USER MANUAL SPORTAGE 3 KIA

Key is not in vehicle

Press brake pedal to start engine

Press clutch pedal to start engine

Check stop lamp fuse

TIRE AND LOADING INFORMATION

RENSEGNEMENTS SUR LES PNEUS ET LE CHARGEMENT

SEATING CAPACITY NEOPE DES PLACESTOTAL 5FRONT AVANT2REAR ARRIVE

TIRE AND LOADING INFORMATION

RENSEGNEMENTS SUR LES PNEUS ET LE CHARGEMENT

SEATING CAPACITYTOTAL 5FRONT 2REAR 3
NOREX DE LINESAVANT

TIRE AND LOADING INFORMATION

RENSEGNEMENTS SUR LES PNEUS ET LE CHARGEMENT

SEATING CAPACITYTOTAL 5FRONTREAR
NEOPE DE PLACESAVANTARRIVE
The combined weight of occupants and cargo should never exceed 420 kg or 926 lbs La pôls total des occupants et du chargement ne doit jamais dépasser
TIRE PENESIZE DIMENSIONSCOLD TIRE PRESSURE PRESSION DES PENE A FRIDOSEE OWNER'S MANUAL FOR ADDITIONAL INFORMATION
FRONT AVANT235/55R18230KPa, 33psiVOR LE MANUEL DE LUSAGER POUR PLUS DE RENSEIGNEMENTS
PEER ARRIVE235/55R18230KPa, 33psi
SPARE DE SECOURST15590D16420KPa, 60psi

SLTIRE03N

E150100AUN

Directives concerning le vérin

WARNING - Jack location

To reduce the possibility of injury, be sure to use only the jack provided with the vehicle and in the correct jack position; never use any other part of the vehicle for jack support.

KIA SPORTAGE 3 - WARNING - Jack location - 1

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : KIA

Model : SPORTAGE 3

Category : SUV