Linear 5 MK II 112 FA - Loudspeaker HK AUDIO - Free user manual and instructions
Find the device manual for free Linear 5 MK II 112 FA HK AUDIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Active two-way amplified speaker |
| Brand | HK Audio |
| Model | Linear 5 MK II 112 FA |
| Category | Loudspeaker |
| Dimensions (H x W x D) | 600 x 350 x 350 mm |
| Weight | Approx. 18 kg |
| Power supply | 220-240 V ~ 50/60 Hz |
| Power consumption | 300 W |
| Frequency response | 50 Hz - 20 kHz |
| Amplifier power | 500 W RMS Class D |
| Woofer | 12-inch woofer |
| Tweeter | Compression driver |
| Input connection | Balanced XLR female |
| Output connection | Balanced XLR male (link) |
| Controls | Volume, EQ, presets via RJ45 |
| Maintenance and cleaning | Soft dry cloth, avoid abrasive products |
| Safety | Use away from moisture, disconnect before maintenance |
| Spare parts and repairability | Contact HK Audio after-sales service |
| General information | User manual available for free download |
Frequently Asked Questions - Linear 5 MK II 112 FA HK AUDIO
How to connect the Linear 5 MK II 112 FA speaker?
Connect a balanced XLR cable from your audio source (mixer, microphone) to the XLR input of the speaker. Use the XLR output to daisy-chain multiple speakers. Then plug in the power cord.
Can I use this speaker with a subwoofer?
Yes, the speaker has an XLR output that can be connected to an active subwoofer. You can also use the dedicated preset to optimize the response.
What is the power of the built-in amplifier?
The Class D amplifier delivers 500 W RMS, ensuring powerful and clear sound reproduction for PA applications.
How to adjust the EQ?
EQ adjustments are made via the rear panel. You have knobs for bass and treble, as well as presets accessible via RJ45 (requires optional controller).
What to do in case of hiss or noise?
Check cables and connections. Make sure the XLR cable is balanced and of good quality. Avoid placing the speaker near sources of electromagnetic interference.
How to clean the speaker?
Use a soft dry cloth. Never use solvents or abrasive products. For the grille, a vacuum cleaner with a brush attachment can be used.
What are the dimensions and weight of the speaker?
The dimensions are approximately 600 x 350 x 350 mm (H x W x D) and weight is about 18 kg. Use a suitable stand for transport.
Can I use it outdoors?
Yes, as long as it is protected from rain and moisture. The speaker is not waterproof, so provide shelter or a protective cover.
How to reset to factory settings?
Press and hold the 'Preset' button for about 5 seconds until the LED flashes. Release, settings return to factory defaults.
Where to find spare parts?
Contact HK Audio after-sales service or an authorized dealer. Spare parts (speakers, circuits) are available on order.
User questions about Linear 5 MK II 112 FA HK AUDIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Linear 5 MK II 112 FA - HK AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Linear 5 MK II 112 FA by HK AUDIO.
USER MANUAL Linear 5 MK II 112 FA HK AUDIO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HK AUDIO
Model : Linear 5 MK II 112 FA
Category : Loudspeaker