Mobile Spot 50 - Lamp ColorKey - Free user manual and instructions
Find the device manual for free Mobile Spot 50 ColorKey in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mobile LED Spot Light |
| Model | Mobile Spot 50 |
| Brand | ColorKey |
| Dimensions (approx.) | 20 x 15 x 10 cm |
| Weight | 1.5 kg |
| Power Source | AC 100-240V, 50/60 Hz or rechargeable battery |
| Power Consumption | 50W |
| Light Source | High-power RGBW LED |
| Beam Angle | 25° |
| DMX Channels | 6/8 channels |
| Control Modes | DMX, Master/Slave, Sound Active, Auto |
| Main Functions | Adjustable color, strobe, dimming, pan/tilt via DMX |
| Housing Material | Aluminum alloy |
| Protection Rating | IP20 (indoor use only) |
| Cooling | Active fan cooling |
| Care and Cleaning | Wipe with dry cloth; avoid solvents |
| Safety Precautions | Do not stare into beam; ensure ventilation; use correct voltage |
| Spare Parts Available | LED module, power cord, fuse, fan |
| Repairability | Modular design; user-replaceable parts with basic tools |
| General Information | Portable spot light for stages, events, and mobile DJs |
Frequently Asked Questions - Mobile Spot 50 ColorKey
How do I connect the Mobile Spot 50 to a DMX controller?
Use standard 3-pin XLR cables. Set the DMX address using the DIP switches or menu on the rear panel. Refer to the manual for channel mapping.
Can I use the spot light on battery power?
Yes, the Mobile Spot 50 has a built-in rechargeable battery. Charge fully before first use. Battery life is approximately 4 hours at full power.
What should I do if the light doesn't turn on?
Check the power connection and ensure the battery is charged. Verify the fuse is intact. If still not working, contact ColorKey support.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Avoid abrasive materials that could scratch the lens.
Is the Mobile Spot 50 suitable for outdoor use?
No, it has an IP20 rating and is designed for indoor use only. Exposure to moisture can damage the unit.
Can I control the light without DMX?
Yes, you can use the built-in sound active mode, master/slave mode, or auto mode with preset programs. Select via the control panel.
How do I replace the LED module?
Disconnect power. Remove the front cover by unscrewing it. Disconnect the wires and replace with a compatible LED module. Reassemble and test.
What is the maximum number of units in master/slave mode?
You can link up to 32 units in a daisy chain. Set the first as master and the rest as slaves. They will synchronize to the master's program.
Why is the fan noisy?
The fan is temperature-controlled. If it runs at high speed, ensure proper ventilation. Clean any dust from the vents. If noise persists, the fan may need replacement.
Where can I download the full user manual?
The manual is available for free download on notice-facile.com in the product page for ColorKey Mobile Spot 50.
User questions about Mobile Spot 50 ColorKey
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Mobile Spot 50 - ColorKey and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mobile Spot 50 by ColorKey.
USER MANUAL Mobile Spot 50 ColorKey
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ColorKey
Model : Mobile Spot 50
Category : Lamp