AirHub DMX - Controller ColorKey - Free user manual and instructions
Find the device manual for free AirHub DMX ColorKey in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless DMX Controller |
| Brand | ColorKey |
| Model | AirHub DMX |
| Wireless Protocol | 2.4 GHz proprietary |
| DMX Channels | 512 (1 universe) |
| Control Modes | Standalone, Master/Slave, DMX |
| Display | Backlit LCD, 2-line |
| Power Supply | Rechargeable Li-ion battery, USB-C charging |
| Battery Life | Up to 10 hours continuous use |
| Range | Up to 300m (line of sight) |
| Dimensions | 6.3 x 3.5 x 1.2 inches (160 x 89 x 30 mm) |
| Weight | 0.6 lbs (270 g) |
| Connectors | 5-pin XLR DMX out, USB-C (charging) |
| Fixture Library | Built-in library for common LED fixtures |
| Scene Storage | Up to 150 scenes / chases |
| Firmware Update | Via USB-C (download from ColorKey website) |
| Maintenance | Keep dry, clean with soft cloth; avoid solvents |
| Safety Warnings | Do not disassemble, avoid extreme temperatures |
| Spare Parts | USB-C cable, battery (internal, service only) |
| Repairability | Battery replacement by qualified technician |
| Warranty | Two years limited |
Frequently Asked Questions - AirHub DMX ColorKey
How do I pair the AirHub DMX with a receiver?
Power on both the controller and receiver. Press the Pair button on the receiver, then press Menu on the controller and select Pair. Confirm the pairing ID on both devices.
Can I control non-ColorKey fixtures?
Yes, the AirHub DMX works with any DMX512-compatible fixture. Use the built-in library or manually assign DMX addresses and channels.
How long does the battery last?
The rechargeable lithium-ion battery lasts up to 10 hours on a full charge, depending on usage and backlight brightness.
What is the wireless range?
The typical range is up to 300 meters (line of sight) in open areas. Walls and obstacles may reduce range.
How do I charge the controller?
Connect the included USB-C cable to the controller and a USB power adapter (5V/1A recommended). The charging LED turns red during charging and green when full.
Can I use multiple controllers together?
Yes, you can use one controller as a master and others as slaves, or set different DMX universes for large setups. Refer to the manual for multi-zone configuration.
How do I update the firmware?
Download the latest firmware from the ColorKey support website. Connect the controller to a computer via USB-C, run the updater tool, and follow on-screen instructions.
What does the LCD display show?
The display shows the current mode, DMX address, battery level, wireless status, and active scene or chase number.
Can I save and recall scenes?
Yes, you can store up to 150 scenes or chases. Use the Record button to save current output and the numbered buttons (1-6) plus bank shift for recall.
The controller is not responding. What should I do?
First, check battery level and charge if low. Reset by holding Menu and Record together for 5 seconds. If still unresponsive, re-pair with the receiver.
User questions about AirHub DMX ColorKey
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual AirHub DMX - ColorKey and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AirHub DMX by ColorKey.
USER MANUAL AirHub DMX ColorKey
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ColorKey
Model : AirHub DMX
Category : Controller