AMS-2624P - Switch Luxul - Free user manual and instructions
Find the device manual for free AMS-2624P Luxul in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Ports | 24 x Gigabit Ethernet (10/100/1000) with PoE+, 4 x SFP+ uplink |
| PoE Budget | 370W total, up to 30W per port (PoE+) |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| Dimensions | 17.3 x 11.2 x 1.7 inches (44.0 x 28.5 x 4.3 cm) |
| Weight | 8.6 lbs (3.9 kg) |
| Power Supply | Internal, 100-240V AC, 50-60Hz, 450W max |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, DHCP, VLAN, QoS, Link Aggregation |
| Security Features | 802.1X, ACL, Port Security, DHCP Snooping, STP/RSTP |
| Mounting | 19-inch rack-mountable (brackets included) |
| Cooling | Internal fan, front-to-back airflow |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| MTBF | 500,000 hours |
| Warranty | Limited Lifetime |
| Cleaning | Power off, use dry cloth, avoid liquids |
| Spare Parts | Power supply unit, fan modules, SFP modules (sold separately) |
| Repairability | Modular design; replaceable fans and power supply |
Frequently Asked Questions - AMS-2624P Luxul
How to reset the AMS-2624P to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds using a paperclip. The device will reboot with factory settings.
What is the maximum PoE power per port?
Each port can deliver up to 30W (PoE+ standard). Total power budget is 370W.
How to access the web management interface?
Connect via Ethernet to any port, configure your PC with IP 192.168.1.x (subnet 255.255.255.0), then enter 192.168.1.1 in a browser. Default credentials: admin / admin.
Can I use SFP+ modules for 10G uplinks?
Yes, the 4 SFP+ ports support 10Gbps connections when using compatible 10G SFP+ modules.
How to configure VLANs?
Go to Configuration > VLAN in the web interface. Create VLANs and assign ports to them. Untagged ports should have a PVID.
What is the default IP address of the switch?
The default management IP is 192.168.1.1 with subnet mask 255.255.255.0.
Does the switch support link aggregation (LAG)?
Yes, it supports up to 8 LAG groups with up to 8 ports each, using 802.3ad (LACP) or static trunks.
How to update the firmware?
Download the latest firmware from Luxul support. Go to Maintenance > Firmware Upgrade in the web GUI, select the file, and apply. Do not power off during upgrade.
What is the operating temperature range?
The switch can operate between 0°C to 40°C (32°F to 104°F). Ensure proper ventilation.
How to enable QoS for VoIP?
Go to QoS > Basic Mode, enable ‘CoS’ or ‘DSCP’, and assign high priority to VoIP traffic. You can also create traffic policies under QoS > Advanced.
User questions about AMS-2624P Luxul
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual AMS-2624P - Luxul and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMS-2624P by Luxul.
USER MANUAL AMS-2624P Luxul
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Luxul
Model : AMS-2624P
Category : Switch