Gemini 2 XL - 3D Printer Orbbec - Free user manual and instructions
Find the device manual for free Gemini 2 XL Orbbec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3D Printer |
| Brand | Orbbec |
| Model | Gemini 2 XL |
| Technology | FDM (Fused Deposition Modeling) |
| Build Volume | 300 x 300 x 400 mm |
| Layer Resolution | 0.05 - 0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Bed Leveling | Automatic |
| Connectivity | USB, SD Card, Wi-Fi |
| Display | Touchscreen |
| Power Supply | 24V DC, 350W |
| Weight | 15 kg |
| Dimensions | 500 x 500 x 600 mm |
| Operating Temperature | 15-35°C |
| Safety Features | Overheat protection, automatic shutdown |
| Maintenance | Cleaning nozzle, lubricating rails |
| Spare Parts Available | Hotend assembly, build plate, belts |
| General Info | User manual available in PDF |
Frequently Asked Questions - Gemini 2 XL Orbbec
How do I level the bed on the Orbbec Gemini 2 XL?
The printer features automatic bed leveling. Ensure the build plate is clean, then select 'Auto Level' from the touchscreen menu. The printer will probe multiple points and compensate for any unevenness.
What filament types can I use with this printer?
The Gemini 2 XL supports common filaments like PLA, ABS, PETG, and TPU. Use filament with a diameter of 1.75 mm for optimal results.
How do I change the filament during a print?
Pause the print via the touchscreen, preheat the nozzle to the filament's melting temperature, then use the filament change option. Unload the old filament and insert the new one, then resume printing.
What should I do if my print is not sticking to the bed?
Ensure the bed is level and clean. Apply adhesive like glue stick or painter's tape for better adhesion. Also check that the first layer height and temperature settings are correct for your filament.
How often should I clean the nozzle?
Clean the nozzle after every few prints to prevent clogs. Use a brass brush or a nozzle cleaning needle while the nozzle is hot. Be careful not to damage the nozzle.
Can I connect the printer to my Wi-Fi network?
Yes, the Gemini 2 XL supports Wi-Fi connectivity. Go to 'Network Settings' on the touchscreen, select your network, and enter the password. You can then send files wirelessly.
What is the maximum print speed?
The recommended print speed is 60-80 mm/s for quality prints. Maximum speed can be up to 150 mm/s, but may affect detail and adhesion. Adjust in your slicer settings.
How do I update the firmware?
Download the latest firmware from the Orbbec website, save it to an SD card, insert the card into the printer, and select 'Update Firmware' from the settings menu. Do not turn off the printer during the update.
My prints have stringing issues, what can I do?
Stringing is often caused by high temperature or excessive retraction. Try lowering the printing temperature by 5-10°C and increasing retraction distance in your slicer (e.g., 5 mm). Also enable retraction combing.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email through the website.
User questions about Gemini 2 XL Orbbec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual Gemini 2 XL - Orbbec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Gemini 2 XL by Orbbec.
USER MANUAL Gemini 2 XL Orbbec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Orbbec
Model : Gemini 2 XL
Category : 3D Printer