FLAT PAR TRI7 - Stage lighting American Audio - Free user manual and instructions
Find the device manual for free FLAT PAR TRI7 American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Model | FLAT PAR TRI7 |
| Brand | American Audio |
| LED Type | 7x 3W RGB LEDs |
| Color Mixing | RGB (Red, Green, Blue) |
| Beam Angle | 25 degrees |
| Control Modes | DMX512, Master/Slave, Sound Active, Auto |
| DMX Channels | 3 or 7 selectable channels |
| Dimming | 0-100% linear dimming |
| Strobe Rate | 0-20 Hz |
| Power Input | AC 100-240V, 50/60Hz |
| Power Consumption | 21W (max) |
| Dimensions (L x W x H) | 10.2 x 8.3 x 4.1 inches (259 x 211 x 104 mm) |
| Weight | 3.5 lbs (1.6 kg) |
| Housing Material | Aluminum and plastic |
| Cooling | Fanless passive cooling |
| Mounting Options | Floor stand, truss clamp, or hanging bracket |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
| Protection Rating | IP20 (indoor use only) |
| Included Accessories | Power cord, user manual |
| Safety Recommendations | Use safety cable; keep away from moisture |
| Maintenance | Clean outer surface with dry cloth; avoid liquids |
| Spare Parts & Repairability | LED modules and power supply replaceable by qualified technician |
Frequently Asked Questions - FLAT PAR TRI7 American Audio
How do I set up the FLAT PAR TRI7 for the first time?
Connect the fixture to a power source using the included power cord. Press the MENU button to access the control panel and select your desired mode: DMX, Auto, Sound Active, or Master/Slave.
What DMX channels does the FLAT PAR TRI7 use?
The fixture supports 3-channel (RGB) or 7-channel (RGB, dimmer, strobe, macro, color temperature) modes, selectable via the DMX Mode setting.
How do I clean the fixture?
Disconnect power and use a soft, dry cloth to clean the outer surface. Do not use water or cleaning solvents, as they may damage the electronics.
Why is my fixture not responding to DMX?
Ensure the DMX cable is properly connected and the fixture is set to the same DMX address as your controller. Check that the DMX terminator is placed on the last fixture if necessary.
Can I use the FLAT PAR TRI7 outdoors?
No, this fixture is rated IP20 for indoor use only. Exposure to rain or moisture may cause electrical shock or damage.
How do I replace a faulty LED?
LED replacement should be performed by a qualified technician. Contact American Audio support or an authorized service center for assistance.
What is the maximum distance for DMX control?
DMX signals can travel up to 1000 feet (300 meters) with proper cabling. For longer runs, use a DMX signal amplifier.
How do I synchronize multiple fixtures?
Set one fixture as Master (DMX mode = M/S Master) and others as Slave (DMX mode = M/S Slave). The master will control all slaves in sync.
Can I power multiple fixtures together?
Yes, you can daisy-chain up to 30 fixtures on a single power circuit using the power output sockets. Ensure total current does not exceed circuit rating.
What should I do if the fixture overheats?
The fixture has thermal protection that will automatically shut off if overheating occurs. Allow it to cool down, ensure ventilation is not blocked, and restart.
User questions about FLAT PAR TRI7 American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stage lighting in PDF format for free! Find your manual FLAT PAR TRI7 - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FLAT PAR TRI7 by American Audio.
USER MANUAL FLAT PAR TRI7 American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : FLAT PAR TRI7
Category : Stage lighting