Tri Fecta - Stage lighting American Audio - Free user manual and instructions
Find the device manual for free Tri Fecta American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | American Audio |
| Model | Tri Fecta |
| Category | Lighting Effect |
| Type | LED Multi-Color Effect Light |
| Light Source | 3 x 1W LEDs (Red, Green, Blue) |
| Beam Angle | 25 degrees |
| Control Modes | Auto, Sound Active, DMX, Master/Slave |
| DMX Channels | 3 or 7 (selectable) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 12W |
| Dimensions (L x W x H) | 8.5 x 6.5 x 4.5 inches |
| Weight | 2.2 lbs |
| Housing Material | Durable ABS Plastic |
| Mounting Option | Floor stand or hanging bracket |
| Cooling | Passive convection |
| Safety Features | Auto-reset thermal protection, safety cable loop |
| Included Accessories | Power cord, mounting bracket, user manual |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Repairability | LED modules replaceable by qualified technician |
Frequently Asked Questions - Tri Fecta American Audio
How do I set up the Tri Fecta for DMX control?
Connect the fixture to a DMX controller via 3-pin XLR cable. Set the DMX address using the dip switches on the back. Refer to the manual for channel mapping.
Can I use the Tri Fecta without a DMX controller?
Yes, it has built-in auto and sound-active modes. Press the 'Mode' button to cycle through options. Sound active mode uses the built-in microphone.
How do I clean the Tri Fecta?
Disconnect power and use a soft dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use alcohol or solvents.
What is the maximum number of fixtures in master/slave?
You can link up to 32 units in master/slave mode using XLR cables. The master unit controls the slave units.
Does the Tri Fecta come with a power cord?
Yes, a standard IEC power cord is included. Ensure the voltage matches your local supply (100-240V).
Can I mount the Tri Fecta upside down?
Yes, it has a mounting bracket that allows overhead or truss mounting. Always secure with a safety cable.
What do the LED indicators mean?
A green LED indicates power, red indicates DMX signal, and flashing modes indicate sound active. Refer to manual for full details.
How do I replace an LED if it fails?
LED modules are soldered to the board. Replacement should be done by a qualified technician. Contact American Audio support.
Is the Tri Fecta suitable for outdoor use?
No, it is designed for indoor use only. Exposure to moisture may damage the unit.
How do I reset the Tri Fecta to factory settings?
Power off the unit, press and hold the 'Mode' button while powering on. Release when all LEDs flash. This resets all settings.
User questions about Tri Fecta American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stage lighting in PDF format for free! Find your manual Tri Fecta - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tri Fecta by American Audio.
USER MANUAL Tri Fecta American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : Tri Fecta
Category : Stage lighting