VEQ0612E - Electrical installation system HAGER - Free user manual and instructions
Find the device manual for free VEQ0612E HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Residual Current Circuit Breaker (RCCB) |
| Brand | Hager |
| Model | VEQ0612E |
| Rated Voltage | 230 V AC, 50/60 Hz |
| Rated Current | 63 A |
| Residual Current Sensitivity | 30 mA (AC type) |
| Number of Poles | 2 |
| Breaking Capacity | 10 kA according to IEC 61008 |
| Dimensions (H x W x D) | 85 mm x 36 mm x 70 mm |
| Weight | 0.15 kg |
| Mounting Type | DIN rail (EN 60715) |
| Terminal Capacity | Up to 25 mm² (stranded or solid) |
| Protection Degree | IP20 (finger-safe) |
| Operating Temperature | -25°C to +40°C |
| Standards Compliance | IEC 61008-1, EN 61008 |
| Main Functions | Protection against earth leakage, overcurrent and short-circuit |
| Maintenance | Monthly test using T button; keep clean and dry |
| Safety Features | Double insulated, tamper-proof, green LED indicates ON |
| Replacement Parts | Available through Hager distributors (contact support) |
Frequently Asked Questions - VEQ0612E HAGER
What is the Hager VEQ0612E used for?
The Hager VEQ0612E is a residual current circuit breaker (RCCB) that provides protection against earth leakage currents, as well as overcurrent and short-circuit protection for electrical circuits.
How do I test the VEQ0612E?
Press the 'T' test button monthly. The device should trip and disconnect power. If it does not trip, replace the unit immediately.
Can the VEQ0612E be used in a three-phase system?
No, this model is a 2-pole device designed for single-phase systems (230 V AC). For three-phase, use a 4-pole RCCB.
What wire size can I connect to the terminals?
The terminals accept conductors up to 25 mm² (stranded or solid). Ensure proper tightening torque as specified in the manual.
Why does my VEQ0612E trip frequently?
Frequent tripping may indicate a real earth leakage fault in the circuit, a faulty appliance, or moisture. Unplug all devices and reset; if it still trips, call an electrician.
What is the residual current sensitivity?
The VEQ0612E has a rated residual operating current of 30 mA, which is standard for personal protection against electric shock.
How do I install the VEQ0612E?
Mount on a DIN rail (EN 60715). Connect the line (L) and neutral (N) to the top terminals, load to the bottom. Ensure the supply is off before installation.
What does the green LED indicate?
When lit, the green LED shows that the RCCB is ON and the contacts are closed. If off, the device has tripped or is off.
Is the VEQ0612E suitable for outdoor use?
Its IP20 rating means it is not waterproof. It should be installed inside a suitable enclosure with at least IP44 for outdoor protection.
Where can I find replacement parts?
Replacement parts are available through authorized Hager distributors. Contact Hager support for specific part numbers and availability.
User questions about VEQ0612E HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electrical installation system in PDF format for free! Find your manual VEQ0612E - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VEQ0612E by HAGER.
USER MANUAL VEQ0612E HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : VEQ0612E
Category : Electrical installation system