Lacteo YG2601 - Lactodétecteur TEFAL - Free user manual and instructions
Find the device manual for free Lacteo YG2601 TEFAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Lactose Detector |
| Brand | Tefal |
| Model | Lacteo YG2601 |
| Dimensions (L x W x H) | 15 cm x 8 cm x 3 cm |
| Weight | 180 g |
| Power Source | 2 x AAA batteries (not included) |
| Measurement Range | 0.01% to 10% lactose |
| Accuracy | ±0.005% lactose |
| Measurement Time | Approximately 10 seconds |
| Sample Size | 0.5 mL milk or liquid sample |
| Detection Method | Electrochemical sensor |
| Display | LCD digital display with backlight |
| Auto Power Off | Yes, after 2 minutes of inactivity |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Water Resistance | IPX4 (splash proof) |
| Maintenance | Clean sensor with distilled water after each use |
| Calibration | Automatic calibration with included standard solution |
| Accessories Included | Calibration solution, sample dropper, user manual |
| Spare Parts Available | Replacement sensors, calibration solutions |
| Repairability Index | 7.5/10 (sensor replaceable) |
| Certifications | CE, FCC, RoHS |
| Warranty | 2 years |
| Country of Origin | China |
| Intended Use | For testing lactose in milk, dairy products, and other liquids |
Frequently Asked Questions - Lacteo YG2601 TEFAL
How do I turn on the Tefal Lacteo YG2601?
Press and hold the power button for 2 seconds. The device will display a start-up screen. If it does not turn on, check the batteries.
What type of batteries does the Lacteo YG2601 use?
It requires two AAA alkaline batteries. Insert them in the compartment at the back, observing polarity.
How do I perform a measurement?
First, ensure the sensor is clean. Then, use the dropper to place about 0.5 mL of sample on the sensor. Wait 10 seconds for the reading to stabilize. The result will appear on the LCD screen.
How often should I calibrate the device?
Calibrate once a week or whenever you suspect inaccurate readings. Use the included calibration solution and follow the calibration procedure in the manual.
How do I clean the sensor after use?
Rinse the sensor gently with distilled water and dry it with a lint-free tissue. Do not use alcohol or abrasive cleaners, as they may damage the sensor.
What does the error message 'Err1' mean?
'Err1' indicates a low battery. Replace the batteries with fresh ones. If the error persists, there may be a connection issue.
Can I test lactose in solid food?
No, the device is designed for liquids only. For solid food, you must first extract the liquid (e.g., blend and filter) before testing.
How long does the device stay on if idle?
The auto power-off feature turns off the device after 2 minutes of inactivity to save battery.
Where can I buy replacement sensors?
Replacement sensors can be purchased from Tefal’s official website or authorized retailers. Use only genuine Tefal parts to maintain accuracy.
Is the device waterproof?
It has an IPX4 rating, meaning it is splash-proof but not submersible. Avoid getting the electronic components wet.
User questions about Lacteo YG2601 TEFAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lactodétecteur in PDF format for free! Find your manual Lacteo YG2601 - TEFAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lacteo YG2601 by TEFAL.
USER MANUAL Lacteo YG2601 TEFAL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEFAL
Model : Lacteo YG2601
Category : Lactodétecteur