CarpetXpert EX200UK - Vacuum Cleaner SHARK - Free user manual and instructions
Find the device manual for free CarpetXpert EX200UK SHARK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Carpet Cleaner / Upright Vacuum |
| Model | CarpetXpert EX200UK |
| Brand | Shark |
| Voltage | 220-240 V |
| Power Rating | 1200 W |
| Cord Length | 8 m |
| Clean Water Tank Capacity | 0.6 L |
| Dirty Water Tank Capacity | 0.5 L |
| Cleaning Path Width | 27 cm |
| Weight | 6.8 kg |
| Dimensions (L x W x H) | 45 x 30 x 110 cm |
| Suction Power | 180 AW |
| Brush Type | Deep carpet brush with bristles |
| Noise Level | 75 dB |
| Filtration | Washable foam filter |
| Attachments | Stain tool, upholstery tool |
| Maintenance | Empty tanks after use; clean filter monthly |
| Safety Features | Motor thermal protection, automatic shut-off when tanks are full |
| Repairability | Belts and brushes replaceable; motor serviceable |
| Warranty | 2 years |
Frequently Asked Questions - CarpetXpert EX200UK SHARK
What is the difference between the CarpetXpert EX200UK and a standard vacuum cleaner?
The CarpetXpert EX200UK is a carpet cleaner that also vacuums. It uses water and cleaning solution to deep clean carpets, not just dry suction like a standard vacuum.
How do I clean the dirty water tank?
Rinse the dirty water tank with warm water after each use. Remove the float and rinse separately. Let all parts air dry completely before reassembling.
Can I use any carpet cleaning solution?
Only use Shark branded carpet cleaning solutions to avoid damage or poor performance. Other solutions may cause excessive foaming or clog the system.
Why is my carpet cleaner not picking up water?
Check if the dirty water tank is full. Also inspect the suction nozzle for blockages and ensure the float is not stuck. Clean the filter if needed.
How often should I replace the brush roll?
Replace the brush roll every 6-12 months depending on usage. Signs of wear include frayed bristles or reduced cleaning performance.
Does the EX200UK work on hard floors?
Yes, but it is primarily designed for carpets. For hard floors, use the hard floor setting if available, or switch to a dry vacuum mode. Avoid using water on unsealed wood.
What should I do if the machine shuts off during use?
The motor has thermal protection. Turn off and unplug, then wait 30 minutes for it to cool. Check if the dirty water tank is full or if there is a blockage.
How do I store the carpet cleaner?
Empty and rinse both tanks. Wrap the cord around the cord hooks. Store upright in a dry place. Do not store with water in tanks to prevent mold.
Can I use the EX200UK to clean upholstery?
Yes, it comes with an upholstery tool. Use the same cleaning solution diluted as instructed. Test on an inconspicuous area first.
Where can I find replacement parts?
Replacement parts (brush rolls, filters, belts, tanks) are available on the Shark website or authorized retailers. Use the model number EX200UK to find compatible parts.
User questions about CarpetXpert EX200UK SHARK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual CarpetXpert EX200UK - SHARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CarpetXpert EX200UK by SHARK.
USER MANUAL CarpetXpert EX200UK SHARK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHARK
Model : CarpetXpert EX200UK
Category : Vacuum Cleaner