PowerDetect IP1251UKT - Vacuum Cleaner SHARK - Free user manual and instructions
Find the device manual for free PowerDetect IP1251UKT SHARK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stick Vacuum Cleaner |
| Model | PowerDetect IP1251UKT |
| Brand | Shark |
| Dimensions (L x W x H) | Approx. 26 x 10 x 8 inches (66 x 25 x 20 cm) |
| Weight | Approx. 10.5 lbs (4.8 kg) |
| Battery Type | Lithium-ion, removable |
| Battery Voltage | 25.2V |
| Runtime | Up to 60 minutes (standard mode), 12 minutes (boost mode) |
| Charge Time | Approx. 4 hours |
| Dustbin Capacity | 0.7 quarts (0.66 liters) |
| Filtration | Washable foam and felt filters, HEPA (standard) |
| Motor Power | 650W (max) |
| Suction Power | Up to 160 air watts |
| Self-Cleaning Brushroll | Yes, PowerDetect technology |
| PowerDetect Sensor | Automatically increases suction on carpets |
| Attachments | Crevice tool, dusting brush, upholstery tool, multi-angle brush |
| Noise Level | Approx. 78 dB |
| Washable Parts | Dustbin, filters, brushroll |
| Safety Features | Overheat protection, automatic shutoff if blocked |
| Spare Parts Available | Battery, filters, brushroll, charging dock |
| Repair Information | Visit sharkclean.com for service centers or DIY guides |
| Warranty | Limited 5-year warranty |
| Country of Origin | China |
Frequently Asked Questions - PowerDetect IP1251UKT SHARK
How do I empty the dustbin?
Press the dustbin release button and gently pull out the bin. Then, press the bottom door release to empty debris. For full cleaning, wash the dustbin with water and let it dry completely before reinserting.
What does the PowerDetect sensor do?
The PowerDetect sensor automatically detects carpet vs. hard floors and increases suction on carpets for deeper cleaning. It also adjusts to different floor types seamlessly.
How often should I clean the filters?
Rinse foam and felt filters every 3 months or when performance drops. Let them air dry for 24 hours before reinstalling. Replace them every 6-12 months if worn.
Can I use this vacuum on hardwood floors?
Yes, the PowerDetect IP1251UKT is safe for hardwood floors with the brushroll sensor adjusting speed. Use the hard floor setting or turn off power mode if available.
What is the runtime on a full charge?
In standard mode, runtime is up to 60 minutes. In boost mode, it drops to 12 minutes. Actual runtime varies with floor type and attachments.
How do I troubleshoot a loss of suction?
First, empty the dustbin and clean the filters. Check for blockages in the hose, wand, or floor nozzle. Ensure the brushroll is not tangled with hair. If issues persist, reset the vacuum by holding the power button for 5 seconds.
Is the battery removable and replaceable?
Yes, the lithium-ion battery is removable by pressing the latch on the handle. Replacement batteries can be purchased from Shark or authorized retailers.
How does the self-cleaning brushroll work?
The self-cleaning brushroll uses active bristles that continuously remove hair and debris while in use. After cleaning, you can also use the powered crevice tool to remove any tangled hair.
What attachments come with this model?
Includes: crevice tool, dusting brush, upholstery tool, and a multi-angle brush. These attach to the wand or directly to the handheld unit.
How do I store the vacuum?
You can store it using the free-standing design or wall-mount the charging dock. Ensure the dustbin is empty and the battery is charged for optimal storage.
User questions about PowerDetect IP1251UKT SHARK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual PowerDetect IP1251UKT - SHARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerDetect IP1251UKT by SHARK.