DMP 44 xi - Processor Extron - Free user manual and instructions
Find the device manual for free DMP 44 xi Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Audio Matrix Processor |
| Part Number | DMP 44 xi |
| Brand | Extron |
| Form Factor | Half rack width, 1U high |
| Dimensions (H x W x D) | 1.7 x 8.7 x 6.0 in (4.3 x 22.1 x 15.2 cm) |
| Weight | 2.5 lb (1.1 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz, 0.3A internal |
| Power Consumption | 12 watts typical |
| Audio Inputs | 4 balanced analog line-level (Phoenix connectors) |
| Audio Outputs | 4 balanced analog line-level (Phoenix connectors) + 1 Dante digital output |
| Processing Capabilities | 4x4 audio matrix mixer, DSP (EQ, crossover, delay, compression) |
| Control Interfaces | Front panel buttons, RS-232, Ethernet (TCP/IP) |
| Firmware Upgrade | Via Ethernet using Extron Product Configuration Software |
| Security | Kensington lock slot, password-protected web access |
| Mounting | Rack-mountable with included brackets |
| Accessories Included | Power cord, rack mount ears, rubber feet, Phoenix connectors |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use liquids or solvents. |
| Operating Temperature | 32 to 104 °F (0 to 40 °C) |
| Compliance | CE, FCC Class A, RoHS |
| Warranty | 3 years parts and labor |
Frequently Asked Questions - DMP 44 xi Extron
How do I connect the DMP 44 xi to my audio system?
Connect analog audio inputs and outputs using the provided Phoenix connectors. For digital output, use the RJ-45 Dante port. Power on the unit and configure via the front panel or software.
What software is required to configure the DMP 44 xi?
Use Extron's Product Configuration Software (PCS) or DMP SoftWares for advanced DSP settings. The unit can also be controlled via web interface.
How do I reset the DMP 44 xi to factory defaults?
Press and hold the recessed Reset button on the rear panel for about 5 seconds until the front panel LEDs blink. Release to reset to factory defaults.
Can the DMP 44 xi be controlled remotely?
Yes, via Ethernet (TCP/IP), RS-232, or through Extron control systems. The front panel also provides local control.
What are the audio specifications (frequency response, THD)?
Frequency response: 20 Hz to 20 kHz ±0.5 dB. THD+N: < 0.01% at 1 kHz, typical.
How do I update the firmware?
Download the latest firmware from Extron's website. Use the Product Configuration Software to upload the firmware file via the Ethernet port.
The unit does not power on. What should I check?
Ensure the power cord is securely connected and the outlet is working. Check if the front panel power LED is lit. If not, try the internal fuse removal.
Can I use the DMP 44 xi in a Dante network?
Yes, it has a built-in Dante interface for digital audio transport. Use the Dante Controller software to route audio to/from other Dante devices.
What is the maximum input level?
Analog inputs accept up to +24 dBu. Dante inputs have a digital peak level of 0 dBFS.
How do I clean and maintain the DMP 44 xi?
Disconnect power before cleaning. Use a dry, soft cloth to wipe the surfaces. Do not use abrasive cleaners or solvents. Keep vents clear of dust.
User questions about DMP 44 xi Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual DMP 44 xi - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DMP 44 xi by Extron.
USER MANUAL DMP 44 xi Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : DMP 44 xi
Category : Processor