E 16 - Mixer RCF - Free user manual and instructions
Find the device manual for free E 16 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Mixing Console |
| Brand | RCF |
| Model | E 16 |
| Number of Channels | 16 mono inputs + 2 stereo returns |
| Input Channels | 16 x XLR/TRS combo jacks |
| Equalization | 3-band EQ per channel (High, Mid, Low) |
| Aux Sends | 6 auxiliary sends (pre/post fader selectable) |
| Built-in Effects | 24-bit digital effects processor |
| Phantom Power | +48V phantom power per channel (switchable) |
| Master Output | XLR balanced main outputs + TRS balanced |
| Dimensions | 19" rackmount, 3U height, depth 350 mm |
| Weight | Approx. 8.5 kg |
| Power Supply | AC 100-240V, 50/60 Hz, internal switching power supply |
| Power Consumption | 40 W |
| Frequency Response | 20 Hz - 20 kHz (+/- 1 dB) |
| THD+N | < 0.005% at 1 kHz |
| Signal-to-Noise Ratio | > 90 dB (A-weighted) |
| Clean & Maintain | Use dry cloth; avoid liquids; keep vents free of dust |
| Safety | Do not open, risk of electric shock; use grounded outlet |
| Spare Parts & Repairability | Contact RCF authorized service centers; use original parts |
Frequently Asked Questions - E 16 RCF
How do I connect microphones to the RCF E 16 mixer?
Use XLR cables for microphones. Each channel has a combo XLR/TRS input. Ensure phantom power (+48V) is enabled for condenser microphones.
Can I use this mixer for live sound reinforcement?
Yes, the E 16 is designed for live sound. It has 6 aux sends for monitors, built-in effects, and robust construction for touring.
How do I enable phantom power on a specific channel?
Phantom power is switched globally via the +48V master switch. It applies to all channels simultaneously. Do not connect unbalanced dynamic mics when phantom is on.
What is the best way to clean the mixer?
Disconnect power. Use a soft, dry cloth to wipe surfaces. For stubborn dirt, slightly dampen cloth with water. Never use solvents or spray liquids directly.
How can I route effects to the main mix?
Connect the aux sends to external effects or use the internal effects processor. Return the processed signal via stereo return channels or aux returns.
Does the RCF E 16 have USB connectivity?
No, the E 16 is an analog mixer without USB. For digital recording, use the balanced outputs with an external audio interface.
What is the power consumption?
The mixer consumes approximately 40 W. Use a grounded AC outlet with the correct voltage (100-240V).
My mixer won't power on. What should I check?
First, verify the power cord is securely connected and the outlet is live. Check the power switch position. If still off, contact RCF service.
Can I use the E 16 as a sub mixer?
Yes, use the main outputs or aux sends to feed another mixer. It works well as a stage submixer for larger systems.
How do I adjust the built-in effects?
Use the effects section on the top panel. You can select preset programs and adjust send levels via the auxiliary knobs. See manual for program list.
User questions about E 16 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual E 16 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E 16 by RCF.
USER MANUAL E 16 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : E 16
Category : Mixer