ART 710-A MK5 - Speaker RCF - Free user manual and instructions
Find the device manual for free ART 710-A MK5 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Powered 2-way loudspeaker |
| Brand | RCF |
| Model | ART 710-A MK5 |
| Category | Active loudspeaker |
| Dimensions (H x W x D) | 504 x 306 x 276 mm |
| Weight | 15.6 kg |
| Power supply | Mains 230V ~ 50 Hz, consumption 230W (max) |
| Amplification | Class D, 1400 W peak, 700 W RMS |
| Woofer | 10 inch (254 mm) with 2.5 inch voice coil |
| Tweeter | 1 inch (25 mm) compression driver, polymer diaphragm |
| Frequency response | 50 Hz - 20 kHz (-3 dB) |
| Max SPL | 130 dB SPL (peak) |
| Dispersion angle | 90° x 60° (H x V) |
| Inputs | 1 x XLR combo (balanced), 1 x 6.35 mm jack (balanced) |
| Outputs | 1 x XLR (link out) |
| Controls | Volume, HF/LF EQ, ground lift switch |
| Enclosure material | Reinforced polypropylene, steel grille |
| Mounting | 36 mm pole socket, M10 rigging points |
| Maintenance and cleaning | Unplug the device before cleaning. Use a soft dry cloth. Do not use abrasive products or solvents. |
| Safety | Do not expose to rain or moisture. Do not open the device. Use only the supplied power cord. |
| Spare parts and repairability | Contact an approved RCF service center. Spare parts are available upon request. |
| General information | Professional loudspeaker for sound reinforcement, stage monitoring or fixed installation. 2-year warranty. |
Frequently Asked Questions - ART 710-A MK5 RCF
How do I connect my ART 710-A MK5 to a mixer?
Use a balanced XLR cable to connect the output of your mixer to the XLR combo input of the loudspeaker. Set the speaker volume to zero before connecting, then adjust gradually.
Can I use the ART 710-A MK5 as a stage monitor?
Yes, the loudspeaker has a trapezoidal shape and can be used in tilted position as a stage monitor. Make sure to orient the speaker towards the artist.
How do I adjust the speaker's EQ?
The speaker has two potentiometers: HF (treble) and LF (bass). Turn them clockwise to increase, counterclockwise to decrease. Start with both at 0 dB and adjust according to room acoustics.
What should I do if the speaker doesn't turn on?
Check that the power cord is properly connected and the mains outlet is active. Ensure the power switch (located on the rear) is in the ON position. If the problem persists, contact an approved technician.
Can I mount the ART 710-A on a stand?
Yes, the speaker has a 36 mm socket compatible with most speaker stands. Insert the stand into the socket until it stops and tighten the locking screw.
How do I clean the protective grille?
Use a vacuum cleaner with a soft brush to remove dust. For stubborn stains, a slightly damp cloth can be used, but make sure the speaker is unplugged and water does not enter inside.
What is the maximum power of the speaker?
The ART 710-A MK5 delivers a peak power of 1400 W (700 W RMS) thanks to its Class D amplifier, offering a maximum sound level of 130 dB SPL.
Can I connect multiple speakers in daisy chain?
Yes, use the XLR Link Out output to connect the next speaker. You can chain up to 3 speakers, making sure not to exceed the source capacity.
How do I use the Ground Lift switch?
The Ground Lift switch eliminates hum (buzz) caused by ground loops. If you hear a hum, toggle the switch to 'Lift'. Leave it on 'Ground' if no noise is present.
What is the warranty of the ART 710-A MK5?
The RCF manufacturer warranty is 2 years from the date of purchase. Keep your invoice and register your product on the RCF website to benefit from the warranty.
User questions about ART 710-A MK5 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual ART 710-A MK5 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ART 710-A MK5 by RCF.
USER MANUAL ART 710-A MK5 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : ART 710-A MK5
Category : Speaker