MHL1940 - Effect machine BeamZ - Free user manual and instructions
Find the device manual for free MHL1940 BeamZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Fog machine |
| Brand | BeamZ |
| Model | MHL1940 |
| Power supply | 230 V AC, 50 Hz |
| Power | 1500 W |
| Tank capacity | 1 liter |
| Fluid consumption | 100 ml/min |
| Heating time | Approximately 5 minutes |
| Fog output | 200 m³/min |
| Dimensions (L x D x H) | 300 x 200 x 150 mm |
| Weight | 4 kg |
| Main functions | Wired remote control, DMX512 control |
| Maintenance and cleaning | Clean the nozzles regularly with distilled water |
| Safety | Automatic shutdown in case of overheating, protection fuse |
| Spare parts and repairability | Available parts: heating element, pump, fuse |
Frequently Asked Questions - MHL1940 BeamZ
How to clean the BeamZ MHL1940 fog machine?
To clean the machine, use a mixture of distilled water and white vinegar. Run the machine with this mixture for a few minutes, then rinse with clean water. Do not use harsh chemicals.
What type of fluid to use with the MHL1940?
Use only water-based fog machine fluid. Avoid oily fluids that could damage the device.
Is the remote control included?
Yes, the MHL1940 comes with a wired remote control for remote fog control.
What to do if the machine overheats?
If the machine stops for safety, let it cool down for at least 30 minutes. Check that the ventilation grilles are not blocked.
How to connect the MHL1940 to a DMX controller?
Use a 3-pin XLR cable to connect the machine to your DMX controller. Refer to the manual for DMX address configuration.
The machine is not heating, what to do?
Check that the machine is plugged in and the fuse has not blown. If the problem persists, contact customer service.
How to store the fog machine?
Empty the tank and clean the machine before storage. Store it in a dry, temperate place, away from dust.
Can the MHL1940 be used outdoors?
Yes, but in calm weather. Avoid strong wind which would dissipate the fog too quickly. Protect the machine from rain.
What is the lifespan of the heating element?
With regular maintenance, the heating element can last several hundred hours of use. Replace it if the heating time becomes too long.
How to replace the fuse of the MHL1940?
Unplug the machine, open the fuse compartment near the power inlet, replace the defective fuse with one of the same rating (indicated on the device).
User questions about MHL1940 BeamZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual MHL1940 - BeamZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MHL1940 by BeamZ.
USER MANUAL MHL1940 BeamZ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeamZ
Model : MHL1940
Category : Effect machine