PC-020P36 - Air Conditioning HTW - Free user manual and instructions
Find the device manual for free PC-020P36 HTW in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Mobile air conditioner |
| Brand | HTW |
| Model | PC-020P36 |
| Cooling power | 7000 BTU (approx. 2.05 kW) |
| Maximum cooling area | 20 m² |
| Power supply | 220-240 V ~ 50 Hz |
| Power consumption | 750 W |
| Airflow rate | 300 m³/h |
| Water tank (dehumidification) | 0.5 L |
| Dimensions (W × D × H) | 33 × 29 × 70 cm |
| Net weight | 22 kg |
| Noise level | 52 dB(A) |
| Main functions | Cooling, ventilation, dehumidification, 24h timer, remote control |
| Refrigerant | R290 |
| Filter type | Washable air filter |
| Energy class | A+ |
| Maintenance and cleaning | Clean the filter every 2 weeks; clean the condenser once per season |
| Safety | Frost protection, automatic shutdown in case of overheating |
| Spare parts | Filter, remote control, exhaust hose available |
| General information | 2-year warranty; suitable for rooms up to 20 m² |
Frequently Asked Questions - PC-020P36 HTW
How to install the PC-020P36 mobile air conditioner?
Place the unit near a window. Attach the hot air exhaust hose to the window opening using the provided kit. Plug into a 220-240 V outlet. Make sure the water tank is empty before first use.
How to clean the air filter?
Turn off and unplug the unit. Remove the filter located at the back. Wash it with warm soapy water, rinse and dry completely before reinstalling. Perform this operation every 2 weeks.
What to do if the error light flashes?
Consult the error codes section in the manual. Common codes include: E1 (temperature sensor failure), E2 (water tank full problem). Contact customer service if the issue persists.
The remote control does not work, what to do?
Check the batteries (replace if necessary). Make sure no obstacles are blocking the signal. Point the remote control at the unit's receiver. If the problem persists, reset the unit by unplugging it for 5 minutes.
How to drain the water tank?
When the 'Full' indicator lights up, turn off the unit. Remove the drain plug at the back and empty the water into a container. Replace the plug. In dehumidification mode, a continuous drain hose can be connected.
What is the noise level during operation?
The noise level is about 52 dB(A) in cooling mode, which is equivalent to normal conversation. At night, use the silent mode if available.
Can I use the air conditioner without an exhaust hose?
No, the exhaust hose is essential to expel hot air. Without it, the unit will not cool effectively and may overheat. Always install it towards the outside.
What is the maximum cooled area?
The PC-020P36 is designed for rooms up to 20 m². For larger areas, performance may be reduced. Insulate the room to optimize cooling.
How to resolve water leaks?
Check that the unit is level. Make sure the tank is not full. Clean the filter to prevent icing. If the leak persists, inspect the window seal or contact a technician.
Where to find spare parts?
Contact HTW customer service or check the list of authorized dealers. Common parts like the filter, remote control, and exhaust hose are available online.
User questions about PC-020P36 HTW
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual PC-020P36 - HTW and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PC-020P36 by HTW.
USER MANUAL PC-020P36 HTW
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HTW
Model : PC-020P36
Category : Air Conditioning