TP-DY 18 Li BL - Screwdriver EINHELL - Free user manual and instructions
Find the device manual for free TP-DY 18 Li BL EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless impact screwdriver |
| Brand | Einhell |
| Model | TP-DY 18 Li BL |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 18 V |
| Motor type | Brushless |
| No-load speed (1st gear) | 0 – 500 rpm |
| No-load speed (2nd gear) | 0 – 2000 rpm |
| Max torque | 50 Nm |
| Number of torque settings | 20 + 1 drilling |
| Chuck | Keyless, self-tightening 1 – 13 mm |
| Max drilling diameter in wood | 35 mm |
| Max drilling diameter in steel | 10 mm |
| Weight (without battery) | 1.2 kg |
| Dimensions (L x W x H) | 210 x 70 x 200 mm |
| Power supply | 18 V Power X-Change battery (not included) |
| Main functions | Screwing, drilling, hammer (optional) |
| Maintenance and cleaning | Clean with a dry cloth; avoid liquids; store in a dry place |
| Safety | Safety clutch, overload protection, lockable switch |
| Spare parts and repairability | Parts available through Einhell customer service; repair by a professional |
| General information | Tool compatible with the Power X-Change range; delivered without battery or charger |
Frequently Asked Questions - TP-DY 18 Li BL EINHELL
Which battery to use with the Einhell TP-DY 18 Li BL?
Use an 18 V lithium-ion battery from the Einhell Power X-Change range. The charger and battery are not included.
How to change the speed of the screwdriver?
The tool has an electronic speed variator. To switch between the two speed ranges, use the speed selector located on top of the housing.
What to do if the chuck does not tighten properly?
Make sure the chuck is clean and the bit is inserted properly. Turn the chuck ring manually to tighten. If the problem persists, contact after-sales service.
How to adjust the torque?
Turn the torque adjustment ring located behind the chuck. Choose from 20 torque positions plus a drilling position. The torque increases with the number.
The battery charge indicator blinks, what to do?
A blinking light may indicate a low battery or a defect. Recharge the battery with a compatible charger. If the problem persists, replace the battery.
Can I use the screwdriver in hammer mode?
Yes, the TP-DY 18 Li BL model is a hammer screwdriver. Select the hammer mode using the switch located on top of the tool.
How to clean the tool?
Clean the housing with a soft dry cloth. Never use water or harsh chemicals. The ventilation slots must be free of dust.
Which bits can I use?
Use screwdriver bits or drill bits with a 1/4 inch hex shank or round bits up to 13 mm diameter in the self-tightening chuck.
The screwdriver stops during use, why?
This may be due to overload. Let the tool cool down for a few minutes. Also check the battery condition. If the problem recurs, contact customer service.
Where to find spare parts for my Einhell TP-DY 18 Li BL?
Spare parts are available from the Einhell after-sales service or on the official website. Have the model number and part reference ready.
User questions about TP-DY 18 Li BL EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual TP-DY 18 Li BL - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-DY 18 Li BL by EINHELL.
USER MANUAL TP-DY 18 Li BL EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TP-DY 18 Li BL
Category : Screwdriver