Omnia S1 - Audio Receiver NuPrime - Free user manual and instructions

Product Type	Audio Receiver / Streaming Preamp
Brand	NuPrime
Model	Omnia S1
Dimensions (W x H x D)	280 mm x 60 mm x 250 mm
Weight	2.5 kg
Power Supply	AC 100-240V, 50/60 Hz
Inputs	WiFi, Bluetooth, USB-B, Optical, Coaxial, RCA Analog
Outputs	RCA Line Out, Speaker Output (binding posts)
Supported Audio Formats	DSD64/128/256, PCM up to 384kHz/32-bit, MQA
Streaming Services	AirPlay 2, DLNA, Spotify Connect, Tidal, Qobuz
Max Power Output	50W per channel into 8 ohms
Frequency Response	20 Hz - 20 kHz ±0.5 dB
Signal-to-Noise Ratio	>100 dB
THD+N	<0.002%
Control	IR remote, front panel buttons, mobile app
Connectivity	802.11ac dual-band WiFi, Bluetooth 5.0
Front Panel	3.5mm headphone jack, volume knob, input selector
Rear Panel	Trigger in/out, RS-232, Ethernet, antenna connectors
Material	Aluminum chassis
Cleaning	Wipe with dry soft cloth; avoid liquids and solvents
Safety	Do not expose to moisture, do not open cover, use grounded outlet
Spare Parts / Repairability	Contact NuPrime authorized service center; limited user serviceable parts

Frequently Asked Questions - Omnia S1 NuPrime

How do I connect the Omnia S1 to my home Wi-Fi?

Use the NuPrime app (iOS/Android) or connect via Ethernet. For wireless, press the WiFi button on the front panel, then select the device's SSID from your phone's Wi-Fi settings and configure via the app.

Can I use the Omnia S1 as a standalone amplifier?

Yes, the Omnia S1 is a stereo integrated amplifier with streaming capabilities. Connect speakers directly to the binding posts. It delivers 50W per channel into 8 ohms.

Does it support MQA decoding?

Yes, the Omnia S1 fully decodes MQA via the USB-B input, providing studio-quality sound from Tidal Masters and other MQA sources.

What is the difference between line out and speaker out?

Line out is a fixed or variable analog output for connecting to external amplifiers or subwoofers. Speaker out is amplified output for passive speakers. Use the appropriate terminals based on your setup.

How do I perform a factory reset?

Press and hold the Power button for 10 seconds until the front panel blinks. Alternatively, use the app's settings menu or the web interface. This clears all settings and network configurations.

Can I stream from my computer?

Yes, use the USB-B input for direct connection to your PC or Mac. The unit appears as an audio device. Also supports DLNA and AirPlay 2 for wireless streaming.

Is there a headphone output?

Yes, a 3.5mm headphone jack is on the front panel. When headphones are plugged in, the speaker outputs are muted automatically.

How do I update the firmware?

Firmware updates are delivered via the NuPrime app or over the network. Go to Settings > Firmware Update and follow prompts. Ensure the device stays powered on during update.

What should I do if the device loses network connection?

Check your router and restart the Omnia S1. If using Wi-Fi, try moving closer to the router or use Ethernet. Reconfigure network settings via the app if needed.

Can I control the Omnia S1 without the app?

Yes, the front panel has buttons for power, volume, input selection, and play/pause. The included IR remote also provides basic control. The app offers full functionality including streaming service integration.

USER MANUAL Omnia S1 NuPrime

Omnia S1 is purpose-built audio equipment that optimizes as a DLNA Server and Renderer. It has the added benefit of running native Android streaming apps.

Omnia S1

USER'S MANUAL

Table of Contents

FCC Notice - Declaration of Conformity Information....2

EU Declaration of Conformity ....3

For customers in Europe ....3

SAFETY INSTRUCTIONS ....4

Safe Use and Operation of Your Device ....4

Introduction....7

Setting up the Omnia....10

Admin Settings Web Page 13

Apps & Firmware Update 17

Using the Omnia S1 as Music Server ....20

Using the Omnia S1 as Music Renderer ....20

Using the Streaming Apps ....20

NuPrime's Limited Warranty and Limitation of Liabilities 21

FCC Notice - Declaration of Conformity Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

WARNING: Only peripherals complying with the FCC class B limits may be attached to this equipment.

Changes or modifications made to this equipment, not expressly approved by us or parties authorized by us could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU Declaration of Conformity

Hereby, NuPrime Audio, Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC.

The manufacturer of this product is NuPrime Audio, Inc., 1712 Pioneer Ave. Ste 1817, Cheyenne, Wyoming 82001, USA.

The Authorized Representative for EMC and product safety is NuPrime Audio, Inc., 1712 Pioneer Ave. Ste 1817, Cheyenne, Wyoming 82001, USA.

For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

For customers in Europe

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.

For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

SAFETY INSTRUCTIONS

There are two categories of Safety Instructions included in this manual:

• Product Warnings, (i.e., what must never be done to assure avoiding those hazards that
• could cause bodily injury or property damage); and
- User Directions (i.e., what must always be done to assure the safe use of your device).

The Safety Instructions contained in this manual have been categorized in accordance with the seriousness of the potential hazards through the use of Signal Words. Those Signal Words, and their intended meanings, are as follows:

DANGER: Indicates that a failure to observe the Safety Instructions could result in death or catastrophic bodily injury.

WARNING: Indicates that a failure to observe the Safety Instructions could result in serious bodily injury.

CAUTION: Indicates that a failure to observe the Safety Instructions could result in minor bodily injury or property damage.

NOTE: Designates important information that relates to activities and/or conditions that might result in loss of data and/or damage to your device.

Safe Use and Operation of Your Device

This equipment emits stray RF energy and will interfere with the reception of signals by airborne electronic navigational devices or medical devices. Do not operate this equipment near any sensitive medical devices.

WARNING: Use only grounded AC power cords.

Always immediately disconnect the power to the equipment in the event the device emits an unusual odor or sound or generates smoke.

NUPRiME

WARNING: Never attempt to disassemble, repair or make any modification to your device. Disassembly, modification or any attempt at repair could cause bodily injury or property damage, as well as damage to the device itself.

WARNING: Your device is not a toy. Never allow children to play with your device. Misuse, rough or improper handling of your device by children could result in serious bodily injury for any of the enumerated safety warnings in this manual. In addition, always keep all accessories and components out of the reach of small children as small parts might present a choking hazard. Seek immediate medical attention if choking occurs or if any small part has been swallowed.

CAUTION: Never raise the sound volume level too high when using your device with earphones. An excessive sound volume level could cause damage to your hearing.

WARNING: To reduce the risk of re or electric shock, do not expose the unit to moisture or water.

Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit.

Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat.

The unit must be connected to a power supply only of the type and voltage speci ed on the rear panel. Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable.

NUPRiME

Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where the cord exits the back of the unit.

The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to be left unused for a long period of time.

Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged.
- Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation.
• The unit has been dropped or damaged in any way

NUPRiME

Introduction

The Omnia S1 is a purpose-built audio equipment that performs both as a Server and a Renderer for your Digital Audio collection. The Server and Renderer are both DLNA/UPnP compatible, therefore allowing the flexibility of streaming music stored on the Omnia S1 to other DLNA/UPnP compatible renderers; and also streaming music from other DLNA/UPnP compatible servers to the Omnia S1. You can choose to use any DLNA/UPnP compatible controller software (e.g. Bubble UPnP) with the Omnia.

The firmware used for the Omnia S1 is based on Google's Android operating system. A custom audio driver and hardware were developed which are used by the Renderer to send bit-perfect digital audio via the digital outputs. It also allows Hi-Res PCM audio, DSD(DoP) and I2S playback through a compatible DAC.

Hardware Features:

1. The ARM CPU and firmware handle 32-bit/768kHz and DSD1024 decoding of any available music format.

2. Audio Processing Decoupled from CPU: To isolate the audio processing from performance degradation due to high CPU utilization or signal drop-off due to

wireless congestion, the Omnia Audio Processor Unit (OAP Unit) operates independently from the CPU and provides caching of digital music and completely eliminates jitter.

Being a digital transport without the moving parts of a disc based system, the performance of the Omnia S1 surpasses most CD transports. The dedicated firmware designed for low latency playback enables a superior quality compared to typical PC or ARM based offerings.

Specifications

Refer to the above illustration from left to right:

• AC socket
  • USB 3.0 port for hard disk and system upgrade use
  • Coaxial output (PCM up to 192kHz and DoP format DSD64)
  • Optical output (PCM up to 192kHz and DoP format DSD64)
  • I2S output (PCM 32K to 768K, DSD64 to DSD1024)
  • HDMI display output (video only)
  • 4 X USB 2.0 ports for mouse, keyboard, WiFi dongle, and hard disk.
• RJ45 ethernet port
• Hardware reset button

I2S port specification:

I2S PIN Define:

PIN 1: I2S_DATA-

PIN 2: GND

PIN 3: I2S_DATA+

PIN 4: I2S_BCK+

PIN 5: GND

PIN 6: I2S_BCK-

PIN 7: I2S_LRCK-

PIN 8: GND

PIN 9: I2S_LRCK+

PIN 10: I2S_MCK+

PIN 11: GND

PIN 12: I2S_MCK-

PIN 13: NC

PIN 14: DSD ON

PIN 15: NC

PIN 16: NC

PIN 17: GND

PIN 18: NC

PIN 19: NC

Supported Audio Formats

File Types

AAC, AIFF, ALAC, APE, DSF, DXD, FLAC, MP3, OGG, WAV, WMA

Bitrates

16bits, 24bits, 32bits

Sample Rates

PCM: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 KHz

DSD: 2.8MHz (optical and coaxial outputs), 45.2MHz (I2S)

Setting up the Omnia

The Omnia S1 can be connected to your network either by using a wired connection (Ethernet) or using the supplied USB dongle for a wireless connection.

Wired Connection (Ethernet)

Connect the Omnia S1 to your network router using a LAN cable. By default, the Omnia will obtain an IP Address from your router via DHCP automatically. Power on the Omnia S1 via the rear switch and both the Omnia Server and Renderer should be visible under your network devices after a few minutes.

Wireless Connection

Note: A HDMI display and USB mouse is required for performing this setup.

Insert the supplied USB dongle into one of the available USB port on the rear panel of the Omnia S1. Connect the USB mouse to another one of the available USB port. Connect the display to the Omnia S1 via the HDMI video port. Power on the Omnia S1 and wait till the first time initialization completes (the unit may restart automatically during the initialization). The setting icon is located at the bottom row on the home screen. Click on the setting icon which will bring you to the settings page. Click on WIFI which will bring to the WIFI settings page. The on/off toggle for the WIFI is located at the top right of the screen.

Toggle it to 'ON' and the system will start scanning for available WIFI networks. Select the network from the list that you wish to connect to. For secured networks, you will be asked for the password. Enter the password using the onscreen keyboard (or optionally a USB keyboard connected to the Omnia S1) and the Omnia S1 should be connected to your wireless network.

NUPRiME

*Note that the Omnia S1 will take some time to perform a first time initialization. The boot up time will significantly reduce for subsequent power on.

Admin Settings Web Page

Local Access

If you have a display, mouse and keyboard connected to the Omnia, you can access the Admin Settings page by clicking on the 'Red Ribbon' icon on the home screen.

Remote Access

The Admin Settings Web Page can be accessed by any web browser that is on the same network as the Omnia S1. You will require the IP Address of the Omnia S1 on your network to enter into your browser's

NUPRiME

URL bar. Below is an example identifying the IP Address and accessing the Admin Settings Web Page with a Windows PC.

The settings on this page allows you to perform the admin functions for the Omnia.

Server Name – Shows the current name of the Omnia Server that will appear in your UPnP browser/controller.

Renderer Name – Shows the current name of the Omnia Renderer that will appear in your UPnP browser/controller.

New Server Name – Change the name of the Omnia Server that appears in your UPnP browser/controller. To change, type in the new name in the text box and click on the 'Change Server Name' button.

NUPRiME

New Renderer Name – Change the name of the Omnia Server that appears in your UPnP browser/controller. To change, type in the new name in the text box and click on the 'Change Server Name' button.

Restart DLNA Services – Click on the button to restart the Server and Renderer (if they become unresponsive to the controller).

Rescan Media and restart SERVER – Click on the button to rescan your music library (when new music is added to the attached storage devices) and restart the Server.

Reset Server Database – Click on the button to reset the Server database (if the indexing of the audio files becomes corrupted i.e. showing wrong track info).

Check Update – Click on the button to check if a newer version of the application package is available online. If a newer version is available, the system will automatically download the package and restart the unit to perform the update (requires internet connectivity).

Power Off/Reset Omnia – Click on the button to power off (recommended especially if a mechanical hard drive is connected before turning off via the main switch) or reboot the unit.

NUPRiME

Apps & Firmware Update

Omnia S1 is a customized Android OS and hardware. Therefore, users are not permitted to install any App unless it is tested and released by NuPrime. Whenever an existing App has a new version or a new App is introduced, it will be uploaded to NuPrime website for the Check Update function to perform a series of steps to install the App.

When updating the applications using the Check Update function, please do not close the browser window as that will terminate the update. The progress of the update can be monitored in the browser window in case of any errors.

After the application package has been downloaded and while the apps are installing, you may see the below screen:

Click on ACCEPT to continue the installation. To prevent such prompts in the future, bring up the apps

menu by clicking the 📄 icon on home screen and then click on Google Settings. Click on Security and then Google Play Protect.

Turn off Scan device for security threats as shown in the screenshot below which will disable such prompts.

Omnia S1 Firmware Update

In the rare event that Omnia S1 operating system and firmware have to be updated, please visit the Omnia S1 product page download tab on NuPrimeAudio.com

Using the Omnia S1 as Music Server

During the first initialization, the system will search all physically connected storage devices for playable music content and automatically add them to the library. The Server is DLNA/UPnP compatible, so you can use any DLNA/UPnP software (e.g. BubbleUPnP) to browse the library and stream the music content to any DLNA/UPnP compatible renderer on the same network. To select the Omnia S1 as the music server, please refer to the instructions or guides for the DLNA/UPnP software you are using. If new music content is subsequently added to the storage devices, you can refresh the library using the Admin Settings Web Page.

Using the Omnia S1 as Music Renderer

The Omnia S1 DLNA/UPnP Compatible Renderer is automatically started when the system powers on. In your preferred DLNA/UPnP software, choose the Omnia S1 as the renderer and you will be able to stream music from any DLNA/UPnP compatible server on the same network. Please refer to this section for the audio formats, bitrates and sample rates supported by the Renderer.

Using the Streaming Apps

Note: A HDMI display and USB mouse is required for using the Streaming Apps.

The Omnia S1 comes pre-installed with the below Streaming Apps. The versions of these Apps have been verified to be working with the installed firmware version. You will need to perform initial setup with your own accounts for these Apps. The Apps functions in the same way as if they are installed on other Android devices.

Refer to NuPrime website for a list of supported streaming apps.

NuPrime's Limited Warranty and Limitation of Liabilities

ADDITIONAL RIGHTS

FOR CONSUMERS, WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. THIS WARRANTY DOES NOT EXCLUDE, LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING OUT OF NONCONFORMITY WITH A SALES CONTRACT. SOME COUNTRIES, STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY LAST, SO THE LIMITATIONS OR EXCLUSIONS DESCRIBED BELOW MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY COUNTRY, STATE OR PROVINCE. THIS LIMITED WARRANTY IS GOVERNED BY AND CONSTRUED UNDER THE LAWS OF THE COUNTRY IN WHICH THE PRODUCT PURCHASE TOOK PLACE.

LIMITED WARRANTY

For a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser ("Warranty Period"), NuPrime warrants (in) this product against defects in materials and workmanship, and (ii) that each Product, unmodified and under normal use and conditions, will substantially comply with NuPrime' applicable written technical documentation for the Product. NuPrime reserves the right to make substitutions and modifications from time to time in the specifications of Products sold by NuPrime, provided that such substitutions or modifications do not materially affect overall Product performance.

If a hardware defect exists and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, NuPrime will (1) repair the hardware defect at no charge, using new or refurbished replacement parts, (2) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. NuPrime may request that you replace defective parts with user-

installable new or refurbished parts that NuPrime provides in fulfillment of its warranty obligation. A replacement product/part assumes the remaining warranty of the original product or ninety (90) days from the date of replacement or repair, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes NuPrime's property. When a refund is given, your product becomes NuPrime's property.

OBTAINING WARRANTY SERVICE

If you purchased the product in the U.S., deliver the product, at your expense, to any NuPrime Service Center located in the U.S. If you purchased the product outside of the U.S., deliver the product to any NuPrime Authorized Importer in the country where you purchased the product. Be aware, however, that not all countries have NuPrime Authorized Service Providers ('NASP') and not all Authorized Service Providers outside the country of purchase have all parts or replacement units for the product. If the product cannot be repaired or replaced in the country it is in, it may need to be sent to a different country or returned to the country of purchase at your expense for repair or replacement. If you seek service in a country that is not the country of original purchase, you will comply with all applicable import and export laws and regulations and be responsible for all custom duties, V.A.T. and other associated taxes and charges. Where international service is available, NuPrime may repair or exchange defective products and parts with comparable products and parts that comply with local standards.

You can always deliver the product to NuPrime's U.S.A or Taiwan service center for obtaining warranty service, however, you may have to pay for shipping cost.

NuPrime may send you user-installable new or refurbished replacement product or parts to enable you to service or exchange your own product ("DIY Service"). Upon receipt of the replacement product or part, the original product or part becomes the property of NuPrime and you agree to follow instructions, including, if required, arranging the return of original product or part to NuPrime in a timely manner.

When providing DIY Service requiring the return of the original product or part, NuPrime may require a credit card authorization as security for the retail price of the replacement product or part and applicable shipping costs. If you follow instructions, NuPrime will cancel the credit card authorization, so you will not be charged for the product or part and shipping costs. If you fail to return the replaced product or part as

instructed or the replaced product or part is not eligible for warranty service, NuPrime will charge the credit card for the authorized amount.

EXCLUSIONS AND LIMITATIONS

This Limited Warranty applies only to hardware products manufactured by or for NuPrime that can be identified by the "NuPrime" trademark, trade name, or logo affixed to them. The Limited Warranty does not apply to any non-NuPrime hardware products or any accessories, even if packaged or sold with NuPrime hardware. Non-NuPrime manufacturers, suppliers, may provide their own warranties. Other accessories distributed by NuPrime under the NuPrime brand name are not covered under this Limited Warranty. This warranty does not apply: (a) to damage caused by accident, abuse, misuse, misapplication, liquid contact, fire, earthquake, non-NuPrime products, or other external causes; (b) to damage caused by service performed by anyone who is not a NASP; (c) to a product or a part that has been modified without the written permission of NuPrime; (d) to consumable parts, such as batteries, or protective coatings designed to diminish over time unless failure has occurred due to a defect in materials or workmanship; (e) to cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports; (f) to defects caused by normal wear and tear or otherwise due to the normal aging of the product; or (g) if any NuPrime serial number has been removed or defaced.

Important: Do not open the hardware product. Opening the hardware product may cause damage that is not covered by this warranty. Only NuPrime or a NASP should perform service on this hardware product.

THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. NUPRIME SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF NUPRIME CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No NuPrime reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty.

NUPRiME

NUPRIME IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH NUPRIME PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. NUPRIME SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.

Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.

REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.

NUPRIME SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

NUPRiME

beyond ordinary