KM-IP4000S - Uncategorized JVC - Free user manual and instructions
Find the device manual for free KM-IP4000S JVC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network IP Camera |
| Brand | JVC |
| Model | KM-IP4000S |
| Resolution | 4 Megapixels (2560 x 1440) |
| Sensor | 1/3 inch CMOS |
| Lens | 2.8 mm fixed lens, F1.8 |
| Night Vision | Up to 30 meters with IR LEDs |
| Field of View | Horizontal: 102°, Vertical: 55° |
| Video Compression | H.265, H.264, MJPEG |
| Audio | Two-way audio with built-in microphone and speaker |
| Network Interface | Ethernet 10/100 Mbps, RJ45 |
| Wireless | Wi-Fi 802.11 b/g/n (2.4 GHz) |
| Power Supply | DC 12V / PoE (802.3af) |
| Power Consumption | Max 7.5W |
| Dimensions (W x H x D) | 70 mm x 58 mm x 120 mm |
| Weight | 0.5 kg |
| Mounting | Ceiling or wall mount bracket included |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 0% to 95% non-condensing |
| Protection Rating | IP67 (weatherproof) |
| Supported Protocols | TCP/IP, DHCP, DNS, HTTP, RTSP, ONVIF |
| Event Detection | Motion detection, tampering, audio alarm |
| Storage | Micro SD card up to 128GB, NVR |
Frequently Asked Questions - KM-IP4000S JVC
How do I reset the JVC KM-IP4000S to factory defaults?
Locate the reset button on the camera (usually a pinhole). Press and hold it for 10 seconds using a paperclip while the camera is powered on. Release when the indicator light flashes. The camera will reboot with factory settings.
How can I access the camera remotely?
Ensure the camera is connected to your network via Ethernet or Wi-Fi. Use the JVC IP Finder tool or a web browser to find the camera's IP address. Enter the IP address in your browser, then log in with default credentials (admin/admin or as specified). For remote access, configure port forwarding on your router or use a cloud service if supported.
What is the default username and password?
The default username is admin and the default password is admin. For security, change the password after first login.
How do I connect the camera to Wi-Fi?
First, connect the camera to your router via Ethernet. Access the camera's web interface, go to 'Network Settings', select 'Wireless', and scan for your Wi-Fi network. Enter your SSID and password, then save. Disconnect the Ethernet cable; the camera should now connect wirelessly.
The camera has no image or is offline. What should I do?
Check the power supply and network connectivity. Ensure the Ethernet cable is secure or the Wi-Fi signal is strong. Reboot the camera by disconnecting power for 30 seconds. Use the IP finder tool to see if the camera is detected. If not, try a different cable or power adapter.
How do I configure motion detection?
Log into the camera's web interface, go to 'Event' or 'Detection' settings. Enable motion detection, adjust sensitivity (e.g., 50-80%), and define detection areas by drawing zones on the video feed. You can also set triggers for email alerts or recording.
Can I use an external microphone or speaker?
The camera has a built-in microphone and speaker. For external audio devices, check if the camera has audio input/output jacks (typically 3.5mm). Refer to the manual for compatibility and wiring.
How do I update the firmware?
Visit the JVC support website and download the latest firmware for the KM-IP4000S model. Access the camera's web interface, go to 'Maintenance' or 'Firmware Upgrade', upload the file, and follow instructions. Do not power off during the update.
What is the maximum SD card size supported?
The camera supports micro SD cards up to 128GB. Use a Class 10 or UHS-I card for best performance. Ensure the card is formatted to FAT32 or exFAT via the camera's interface.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with lens cleaning solution or isopropyl alcohol. Gently wipe the lens in a circular motion. Avoid touching the lens with fingers. For the camera body, use a dry cloth. Do not use abrasive cleaners.
User questions about KM-IP4000S JVC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual KM-IP4000S - JVC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KM-IP4000S by JVC.
USER MANUAL KM-IP4000S JVC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JVC
Model : KM-IP4000S
Category : Uncategorized