DSP Control - Uncategorized HK AUDIO - Free user manual and instructions
Find the device manual for free DSP Control HK AUDIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Signal Processor Controller |
| Brand | HK Audio |
| Model | DSP Control |
| Dimensions (H x W x D) | 1.75 x 19 x 10 inches (1U rackmount) |
| Weight | 4.5 kg |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 40W |
| Processor | 32-bit floating point DSP |
| Sample Rate | 48 kHz / 96 kHz |
| Analog Inputs | 2x XLR/TRS combo |
| Analog Outputs | 2x XLR |
| Digital Inputs | 1x AES/EBU |
| Digital Outputs | 1x AES/EBU |
| Control | Ethernet, USB, RS-232 |
| Display | 2x20 character LCD |
| Main Functions | EQ, crossover, delay, limiter, presets |
| Maintenance | Clean with dry cloth, avoid solvents |
| Safety | Operate in dry environment, do not expose to moisture |
| Spare Parts | Available from authorized service centers |
| Repairability | Serviceable by qualified personnel |
| General Info | Designed for live sound and installation |
Frequently Asked Questions - DSP Control HK AUDIO
What is the HK Audio DSP Control used for?
The HK Audio DSP Control is a digital signal processor designed for managing audio routing, equalization, crossovers, delays, and dynamics in live sound and installation systems.
How do I reset the DSP Control to factory defaults?
Press and hold the 'Menu' button while powering on the unit. Continue holding until the display shows 'Reset to defaults?' then confirm using the 'Enter' button.
Can I control the DSP Control via software?
Yes, the DSP Control can be controlled via the included HK Audio DSP Remote software over Ethernet or USB connection.
What sample rate should I use for my setup?
Use 48 kHz for most live applications. Select 96 kHz only if your audio source and downstream devices support it, as it doubles processing load.
How do I set up a crossover for a subwoofer?
Navigate to the 'Crossover' menu, select the output channel for the sub, set the filter type (e.g., Linkwitz-Riley 24 dB/oct), and adjust the crossover frequency (typically 80-120 Hz).
How many presets can I store?
The DSP Control can store up to 50 user presets in internal memory, plus factory presets that cannot be overwritten.
Is the DSP Control compatible with other HK Audio speakers?
Yes, it is designed to integrate seamlessly with HK Audio speaker systems. Presets for many HK Audio models are preloaded.
How do I update the firmware?
Download the latest firmware from the HK Audio website. Connect the unit via USB to a computer, run the firmware updater, and follow the on-screen instructions.
What do the LED indicators on the front panel mean?
The 'Power' LED indicates unit powered on. 'Signal' LED flashes with audio input. 'Limit' LED lights when output limiting is active. 'Fault' LED if internal error detected.
Where can I find the user manual for the DSP Control?
The user manual is available for free download on the HK Audio official website or on notice-facile.com. A 17-page PDF in English is provided.
User questions about DSP Control HK AUDIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DSP Control - HK AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSP Control by HK AUDIO.
USER MANUAL DSP Control HK AUDIO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HK AUDIO
Model : DSP Control
Category : Uncategorized