Axcor Wash 300 C61735 - Lamp Claypaky - Free user manual and instructions
Find the device manual for free Axcor Wash 300 C61735 Claypaky in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional LED Wash Light |
| Brand | Claypaky |
| Model | Axcor Wash 300 C61735 |
| Light Source | 300W LED, RGBW color mixing |
| Zoom Range | 5° to 50° |
| Color Temperature | 2,700 - 6,500 K (variable) |
| Beam Angle | 6.5° to 52° |
| Luminous Flux | 12,000 lm (approx.) |
| Control Protocols | DMX512, RDM, Art-Net (optional) |
| DMX Channels | 16 / 24 (selectable) |
| Pan Range | 540° |
| Tilt Range | 270° |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Power Consumption | 450 W (max) |
| IP Rating | IP20 (indoor use only) |
| Cooling | Fan-cooled, variable speed |
| Weight | 18 kg (approx.) |
| Dimensions (L x W x H) | 450 x 300 x 650 mm (approx.) |
| Housing Material | Aluminum / Plastic |
| Safety Features | Overheat protection, automatic shut-off |
| Cleaning | Use a soft dry cloth; avoid solvent |
| Repairability | Modular design; replaceable LED engine |
Frequently Asked Questions - Axcor Wash 300 C61735 Claypaky
How do I reset the Axcor Wash 300 to factory settings?
Go to the menu, select 'Reset Factory' using the control panel, and confirm. This will restore all DMX settings and default parameters.
Can I use this fixture outdoors?
No, the Axcor Wash 300 has an IP20 rating and is designed for indoor use only. Exposure to moisture or dust can damage the unit.
What is the recommended cleaning procedure?
Disconnect power, let the fixture cool, then wipe the housing with a soft dry cloth. For lenses, use a mild lens cleaner. Never use abrasive or solvent-based cleaners.
How do I update the firmware?
Connect the fixture to a computer via USB or DMX interface, download the latest firmware from the Claypaky website, and follow the update instructions in the manual.
What DMX cable should I use?
Use a 5-pin XLR cable (cable with 110-120 ohm impedance) for reliable data transmission. Standard microphone cables may cause signal errors.
How can I reduce fan noise?
The fan speed is automatically regulated by temperature. Ensure adequate ventilation around the fixture. In silent mode (if available), fan speed may be reduced but could affect thermal performance.
The light output seems dim; what could be wrong?
Check the DMX channel settings and ensure the dimmer value is at 100%. Also verify that the color temperature and color mixing are set correctly. If the issue persists, the LED engine may need servicing.
Is the Axcor Wash 300 compatible with Art-Net?
Yes, with an optional Art-Net interface or a compatible DMX node, the fixture can be controlled over Ethernet via Art-Net protocol.
What is the lifespan of the LED engine?
The LED engine is rated for approximately 50,000 hours under normal operating conditions. Replacement should be done by an authorized technician.
How do I set the DMX address?
Use the control panel to navigate to the 'DMX Address' menu. Set the desired address using the up/down buttons, then press Enter to confirm. The fixture will automatically restart with the new address.
User questions about Axcor Wash 300 C61735 Claypaky
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Axcor Wash 300 C61735 - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Axcor Wash 300 C61735 by Claypaky.
USER MANUAL Axcor Wash 300 C61735 Claypaky
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Claypaky
Model : Axcor Wash 300 C61735
Category : Lamp