K-Eye K10 HCR - Lamp Claypaky - Free user manual and instructions
Find the device manual for free K-Eye K10 HCR Claypaky in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Spot |
| Brand | Claypaky |
| Model | K-Eye K10 HCR |
| Light Source | 1000W Discharge Lamp (HCR) |
| Color Temperature | 6000 K |
| Beam Angle | 5° - 50° motorized zoom |
| Color Wheel | 8 colors + white, split colors |
| Gobo Wheel | 7 rotating gobos + open, indexable |
| Prism | 3-facet rotating prism |
| Dimming | 0-100% linear electronic |
| Strobe | 0-25 Hz |
| Focus | Motorized |
| Pan | 540° |
| Tilt | 270° |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 1200 W |
| Dimensions (L x W x H) | 420 x 340 x 580 mm |
| Weight | 18.5 kg |
| Control Protocols | DMX512, RDM |
| Channels | 19 or 25 (selectable) |
| Safety | Safety cable attachment point, auto-reset after power interruption |
| Maintenance | Clean lenses with soft cloth; check fans and filters regularly |
Frequently Asked Questions - K-Eye K10 HCR Claypaky
How do I install the lamp in the fixture?
Ensure the fixture is off and unplugged. Remove the lamp cover, insert the new lamp (HCR type) without touching the glass, and secure it. Replace the cover and reset the lamp hour counter via the menu.
What is the recommended lamp life?
The recommended lamp life is approximately 750 hours. After that, replace the lamp to avoid malfunction.
How do I reset the pan/tilt position?
Go to the fixture's menu, select 'Reset' or 'Home', and confirm. The fixture will perform a full reset to its default positions.
Can I use the fixture in outdoor environments?
No, the K-Eye K10 HCR is designed for indoor use only. Exposure to rain or moisture can cause electrical hazards and damage.
What DMX channels does the fixture use?
The fixture operates in 19 or 25 channel modes. Refer to the DMX chart in the manual for specific channel functions.
How do I clean the lenses?
Use a soft, lint-free cloth slightly dampened with glass cleaner. Avoid abrasive materials. Clean gently to prevent scratches.
What should I do if the fixture does not turn on?
Check the power cable and mains supply. Verify the power switch is on. If the lamp is faulty, replace it. Also check the internal fuse (located near power inlet).
How can I replace a gobo?
Remove the gobo wheel cover, unlock the gobo holder, and insert the new gobo with the correct orientation. Reassemble and test rotation.
What safety precautions should I take?
Always use a safety cable when rigging. Do not stare directly into the light beam. Allow fixture to cool before handling. Ensure proper ventilation around the unit.
Where can I find the user manual?
The user manual can be downloaded for free from notice-facile.com or from the official Claypaky website in PDF format.
User questions about K-Eye K10 HCR Claypaky
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual K-Eye K10 HCR - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K-Eye K10 HCR by Claypaky.
USER MANUAL K-Eye K10 HCR Claypaky
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Claypaky
Model : K-Eye K10 HCR
Category : Lamp