Axcor Beam 300 C61730 - Lamp Claypaky - Free user manual and instructions
Find the device manual for free Axcor Beam 300 C61730 Claypaky in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beam Moving Head Light |
| Brand | Claypaky |
| Model | Axcor Beam 300 C61730 |
| Dimensions (L x W x H) | Approx. 400 x 300 x 500 mm |
| Weight | Approx. 18 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 500 W |
| Light Source | 300 W LED |
| Beam Angle | 1.5° - 3° (motorized zoom) |
| Color Wheel | 14 colors + open |
| Gobo Wheel | 18 gobos + open |
| Pan Range | 540° |
| Tilt Range | 270° |
| Control Protocol | DMX512 |
| DMX Channels | 18 or 24 |
| Operating Temperature | 0°C to 40°C |
| Ingress Protection | IP20 |
| Maintenance | Regular cleaning of optics and fans |
| Safety | Safety cable attachment point; thermal protection |
| Spare Parts | Available through Claypaky service centers |
| Repairability | Modular design for easy servicing |
Frequently Asked Questions - Axcor Beam 300 C61730 Claypaky
How do I reset the Axcor Beam 300 to factory defaults?
To reset to factory defaults, go to the menu, select 'Reset', then 'Factory Defaults'. Confirm with 'Enter'.
What is the optimal cleaning frequency for the optics?
Clean the optics every 50 hours of use or when noticeable dust accumulates. Use a soft lint-free cloth and lens cleaner.
Can I replace the LED module myself?
The LED module should only be replaced by authorized technicians to avoid damage. Contact Claypaky support.
How do I update the firmware?
Use a DMX firmware updater connected to the DMX input. Follow the instructions in the service manual.
What is the maximum ambient temperature for safe operation?
The maximum ambient temperature is 40°C (104°F). Ensure proper ventilation.
How to clean the fans?
Use compressed air to blow out dust from the fan grilles. Ensure the unit is unplugged before cleaning.
What DMX mode should I use?
Use 18-channel mode for basic control or 24-channel mode for extended features like pixel control.
How to mount the fixture safely?
Attach the clamp to the base bracket and secure with a safety cable. Ensure truss is rated for the weight.
What to do if the fixture stops moving?
Check power and DMX connections. Reset the fixture via menu. If persists, a motor or sensor may need service.
How to adjust the beam focus?
Use the focus control on the menu or via DMX channel 5. Rotate the motorized focus ring to desired sharpness.
User questions about Axcor Beam 300 C61730 Claypaky
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Axcor Beam 300 C61730 - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Axcor Beam 300 C61730 by Claypaky.
USER MANUAL Axcor Beam 300 C61730 Claypaky
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Claypaky
Model : Axcor Beam 300 C61730
Category : Lamp