SBS-LI-65 - Uncategorized STEINBERG - Free user manual and instructions
Find the device manual for free SBS-LI-65 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | USB Audio Interface |
| Dimensions (L x W x H) | 200 x 150 x 50 mm |
| Weight | 0.6 kg |
| Power Supply | USB bus power or 5V/1A AC adapter (not included) |
| Audio Resolution | Up to 24-bit / 192 kHz |
| Microphone Inputs | 2 combo XLR/Jack inputs with +48V phantom power |
| Outputs | 2 line outputs 6.35 mm jack, 1 headphone output |
| MIDI | MIDI DIN 5-pin input and output |
| Direct Monitoring Control | Yes, with hardware mixing |
| Included Software | Cubase AI, Steinberg HALion Sonic SE |
| Connectivity | USB 2.0 Type B |
| Care and Cleaning | Clean with a soft, dry cloth. Avoid liquids and moisture. |
| Safety | Use with a grounded outlet. Do not open the device. Avoid shocks. |
| Spare Parts and Repairability | Contact Steinberg customer service or an authorized dealer. |
| General Information | Compatible with Windows 10/11 and macOS 10.15 and later. |
Frequently Asked Questions - SBS-LI-65 STEINBERG
How do I connect the audio interface to my computer?
Use the provided USB cable to connect the interface to a USB 2.0 or 3.0 port on your computer. Turn on the interface via the switch, or it will power on automatically if USB-powered. Install drivers from the Steinberg website if necessary.
What drivers are needed for Windows and Mac?
On Mac, Core Audio drivers are native. On Windows, download the Steinberg USB ASIO driver from the official website. For low latency, use the ASIO driver.
How do I adjust latency?
In your audio software, select the Steinberg ASIO driver. Open the ASIO control panel and reduce the buffer size (e.g., 64 samples) for lower latency. Be careful: too small a buffer may cause crackling.
Can I connect a microphone that requires phantom power?
Yes, enable +48V phantom power via the dedicated button on the interface. Ensure the microphone is connected before activating power to avoid damage.
How do I use direct monitoring?
Use the Direct Monitor button or knob on the interface to mix the direct input signal with the computer's return signal. This allows latency-free monitoring.
Does the interface work with an iPad?
Yes, with a Lightning to USB adapter (Camera Connection Kit) for compatible iPad models. The interface is recognized as a USB audio device.
How do I update the firmware?
Download the Steinberg firmware update tool from the official website. Connect the interface, launch the tool, and follow the instructions. Do not disconnect during the update.
What should I do if no sound comes out of the speakers?
Check that the speakers are powered on and connected to the line outputs. In your computer's audio settings, select the interface as the output device. Increase the volume on the interface.
Is it normal for the interface to get hot?
Slight warmth is normal during prolonged use. If it becomes very hot, check ventilation and unplug it. Contact support if heat is excessive.
How do I clean the device?
Unplug the interface. Use a soft, dry cloth to wipe the surface. Never use liquid or abrasive cleaners. Avoid dust getting into the connectors.
User questions about SBS-LI-65 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SBS-LI-65 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-LI-65 by STEINBERG.
USER MANUAL SBS-LI-65 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-LI-65
Category : Uncategorized