OPM 100 - Measuring equipment NetPeppers - Free user manual and instructions
Find the device manual for free OPM 100 NetPeppers in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Optical Power Meter |
| Brand | NetPeppers |
| Model | OPM 100 |
| Measurement Range | -70 to +10 dBm |
| Wavelength Range | 800 to 1700 nm |
| Display | LCD with backlight |
| Resolution | 0.01 dB |
| Accuracy | ±0.2 dB |
| Connector Type | FC/PC, SC, LC interchangeable |
| Auto Power Off | After 10 minutes of inactivity |
| Power Supply | 2 x AA batteries |
| Battery Life | Up to 100 hours |
| Dimensions | 150 x 75 x 30 mm |
| Weight | 200 g (including batteries) |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Accessories Included | Carrying case, batteries, user manual |
| Safety Features | Overload protection, low battery indicator |
| Cleaning Instructions | Use dry cloth; clean connector with lint-free wipes |
| Repairability | Replaceable batteries; service center for other repairs |
Frequently Asked Questions - OPM 100 NetPeppers
How do I turn on the OPM 100?
Press and hold the power button for 2 seconds. The display will light up and show the current power reading.
What is the correct way to connect a fiber to the meter?
Ensure the connector is clean and dry. Align the keyway and push gently until it clicks into place. Avoid excessive force.
How can I change the wavelength setting?
Press the Wavelength button repeatedly to cycle through preset wavelengths (850, 1300, 1310, 1490, 1550, 1625 nm) or set a custom value using the arrow keys.
What does the 'Hold' function do?
The Hold function freezes the current reading on the display, allowing you to record the value without worrying about fluctuations. Press the Hold button again to release.
How do I change the batteries?
Slide the battery cover on the back downwards. Insert 2 x AA batteries observing polarity, then close the cover securely.
Why does the display show 'LO' or 'HI'?
LO indicates the input power is below the measurement range (< -70 dBm), while HI indicates it exceeds the upper limit (> +10 dBm). Adjust the source or use an attenuator.
Can I use rechargeable batteries?
Yes, NiMH rechargeable AA batteries are supported. Note that battery life may be shorter compared to alkaline batteries.
How often should I clean the optical connector?
Inspect the connector before each use. Clean with a lint-free swab and isopropyl alcohol if dirty. Regular cleaning ensures accurate measurements.
What is the warranty period for the OPM 100?
NetPeppers offers a 2-year limited warranty covering defects in materials and workmanship. Register your product online to activate.
How do I calibrate the meter?
The OPM 100 is factory calibrated and does not require user calibration. For recalibration, contact NetPeppers service centers or return to manufacturer.
User questions about OPM 100 NetPeppers
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual OPM 100 - NetPeppers and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OPM 100 by NetPeppers.
USER MANUAL OPM 100 NetPeppers
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NetPeppers
Model : OPM 100
Category : Measuring equipment